Does anyone have the newer 15R3s with the 1070 OC vBios? If so, would you be willing to upload the newer vbios?
-
-
It's shipping on the new 15's but Alienware isn't releasing it. Unless someone pulls it off a new machine and uploads it there won't be any release for people to download.
-
115 -> 128?
-
I don't know the details, just that it is shipping on new machines.
-
Weird, on my 6820HK / GTX 1080 Board , using the 65W heat sink (xD) , i have 0 stutters playing games like Dota 2 / Overwatch and CS:GO. I did however lock the Clocks to < 1600Mhz, at least until the beefier heatsink gets delivered.Vasudev likes this.
-
You can hard flash a modded 1070 VBios. But you need a SPI flasher and a SOIC Clip.
Results are quite impressive:
http://www.3dmark.com/3dm/21196135
Just take a look at @Coolane's Mobile Pascal TDP Tweaker: http://forum.notebookreview.com/thr...-feedback-thread.806161/page-28#post-10565005 -
How would you know if you have the newer bios from alienware as my system is only 10 days old
-
Use GPU-Z
-
-
You have micron memory on GPU. There are known issues on micron. Try asking Dell to swap with Samsung memory on GPU.Tyurru02 likes this.
-
Looks like you have the updated Vbios with Micron Memory Timing fix.
The beta version was 86.04.54.00.1CTyurru02 likes this. -
What issues would it have caused? I have experiend a lot of issues with a Lagging system already
Tyurru02 likes this. -
Tyurru02 likes this.
-
How did it not overheat? Did you disable the turbo on CPU at the same time?
-
1600Mhz can be achieved with less than 0.800mV, resulting in an average Max 105W Power Draw.
-
So I am now safe? I noticed my GTX1070 does perform well in games. Battlefield 1 I get around 90FPS with 125% scaling on
Vasudev likes this. -
I'd still be kinda scared to do that lol.
There is no need to set resolution scaling above 100%. -
Yeah CPU turbo is disabled. And both CPU and GPU are making out at 87-89C.
Pads are stock, only replaced the thermal paste with Kryonaut for now.
Beefy heatsink comes in tomorrow woohoo.Vasudev likes this. -
Seems like a new money-saving idea for dell eh?
-
HeHe. First TRIPOD with the missing leg, PCH chips with missing heatsink, almost none USB ports, cheapo ssd's. Amazing you still can find a MB inside the chassis
Spartan@HIDevolution and bloodhawk like this. -
Yeah i dont even understand, why there are 3 different heat sinks. Just to save a tiny bit of money by taking out 1 heat pipe. (and one fin stack?)
Clevo is starting to walk the same path with the new KM1 VC HS.
Weirdly enough that Tripod has better contact than my stock DM3 heat sink.Spartan@HIDevolution, Papusan and Vasudev like this. -
-
That is true , but meant it in terms of pure contact and the mounting pressure.Spartan@HIDevolution, Papusan and Vasudev like this.
-
Did you buy AW 15 recently or helping out a friend?
-
Bought the 17 R4 - 7700HQ / 1060
Swapped out the motherboard to a 6820HK / 1080.Vasudev and Spartan@HIDevolution like this. -
As BGA is bare die, the precision aka pressure and fits must be good. Otherwise you could kill it with sloopy fits/pressure. More headroom for bad fits with the lid on.Spartan@HIDevolution, bloodhawk and Vasudev like this.
-
So two AWs and 2 Clevo's and anything else? Are you thinking of making Razer Project Valerie 2.0 with different resolutions?
-
Lol. Neah nothing like that.
Just have 1 AW. Got the motherboard separately.
Vasudev and Spartan@HIDevolution like this. -
eBay?
-
I really wish that Clevo has a bare die mounting option.
Increasing heatsink quality to fit the Intel IHS isn't financially/technically sound to Clevo, seeing as how they're struggling currently with bad QC. -
Why not? -
-
Would you be willing to backup your vbios and upload it TechPowerUp for us?Vasudev likes this.
AW15R3 1070 OC vBios
Discussion in '2015+ Alienware 13 / 15 / 17' started by Ergo7, Jul 24, 2017.