Well after about a year and a bit of use, I am noticing some dust buildup inbetween the keys etc. Normally, I would just pop the keys and clean them individually (with rubbing alcohol), but I decided against it this time around. A few months ago when I accidentally broke a key (got it replaced) I found out just how much of a pain in the ass it is to pop them back in... So I have been looking online for solutions and would like to hear what you have done..
Any suggestions?
-
-
Personally, I'm a little OCD so I find myself wiping my keyboard fairly often. I also don't eat on my keyboard as some appear to.....
That said, when I clean my AW15 keyboard it is with an ever so slightly damp soft cloth and then I use an old make up brush of my girlfriends to get in between the keys.
My desktop keyboard is another matter, it's a Corsair K70 so I just pop those keys off and give them and the base a good wipe!
RatioKiller likes this. -
use a compressor ... I use a compressor and i make a purge to eliminate the water, later blow the keys and use some polymer protector in sprayRatioKiller likes this.
-
Alienware-L_Porras Company Representative
-
I am not eating near the laptop and use a vacuum cleaner on low power. For real cleaning i pop the keyboard tray out and use compressed air.
RatioKiller likes this. -
Thanks for all the suggestions guys. I tend to also not eat near by keyboard, however dust is pilling up and I am worried about the fans..Question, has anyone ever purposely stressed the computer / ran the fans on max to clear out the dust every now and then? Good idea? Bad?
-
When benchmarking I have the fans set to "Performance mode" in the BIOS, that basically sets the fans to 100%. However, you'll find that even at 100% if you have a fair amount of dust, the fans won't clear it. Dust really likes to cling to everything so compressed air or stripping down are your more effective options.
RatioKiller likes this.
How do you clean your laptop keyboard?
Discussion in '2015+ Alienware 13 / 15 / 17' started by RatioKiller, Jun 8, 2016.