The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    E-Blue Arco Laser Mouse - Can't toggle DPI settings

    Discussion in 'Accessories' started by kisetsu17, Aug 29, 2010.

  1. kisetsu17

    kisetsu17 Took me long enough

    Reputations:
    289
    Messages:
    780
    Likes Received:
    2
    Trophy Points:
    31
    ^title.

    So the box of the mouse says the DPI is at 1600. At first I thought it was locked to that, so I said to myself it wouldn't matter, as long as it's 1600DPI. THen when I opened the box I saw that it can be toggled to 800, 1200 and 1600DPI by using the left and right buttons. But lo and behold, it doesn't work!

    Does anyone use the same brand/mouse? I've been reading that I have to hold the buttons for 4s, but I've been holding it down longer and there still isn't a thing happening!

    Thanks in advance. :cool:
     
    kisetsu17, Aug 29, 2010
    #1