Insyde BIOS modding discussions

Yes, is it possible to enable this as options in the bios?

 

You did not get what I wrote in earlier messages. I cannot make the options visible but I can change the values for them (e.g: change status for 'web camera' from Auto to disabled but can't make them visible to change them through bios.

 

can you make a mod with fusion utility enabled?
thanks so much

 

AMD PBS Option, What is this?

 

0x115: Fusion Utility,You can set this permission?
'AMD PBS Option'This do?

 

Today, I carefully put in the articles are read this post, I feel ACER V3.5 version of the BIOS to use should be able to open the hidden advanced menu, it should be different from that offset, you can try to help me change?
http://forum.notebookreview.com/acer/541716-acer-5742g-bios-modding.html

Loading BIOS...

Traceback (most recent call last):
File "C:\Users\杨麟\Desktop\vtenable.py", line 82, in <module>
bin = open(sys.argv[1], "rb").read()
IndexError: list index out of range

 

The command is (on windows):

python.exe vtenable.py old.rom new.rom

Here are all the settings for your bios:

Spoiler

0x3: PCI Slot4 IRQ Priority
0x4: PCI Slot5 IRQ Priority
0x5: PCI Slot6 IRQ Priority
0x8: Numlock
0x33: Azalia
0x39: SATA Mode
0x3e: Type :
0x3f: 32Bit I/O:
0x40: Block Mode:
0x41: Transfer Mode:
0x4e: USB2.0
0x4f: USB Legacy
0x50: PCI Latency Timer
0x58: FACP - C2 Latency Value
0x59: FACP - C3 Latency Value
0x5a: FACP - RTC S4 Wakeup
0x5b: APIC - IO APIC Mode
0x5c: HPET - HPET Support
0x63: USB Boot
0x67: ACPI Selection
0x74: Quick Boot
0x75: Quiet Boot
0x76: Network Boot
0x7c: Boot Priority
0x80: UEFI Boot
0x87: User Access Level
0x8b: ACPI S1
0x8c: ACPI S3
0x8d: Wake on PME
0x8f: Auto Wake on S5
0xa4: Set Supervisor Password
0xa6: Password on Boot
0xaa: Unlock HDD Security
0xb2: Set Master Hdd Password
0xe7: Cool N' Quiet Support
0xe8: Multi CORE Support
0xea: SVM support
0xef: CPU P-State Setting
0xf0: _OSC Support
0xf2: External Lan Controller
0xf3: Special Features
0xf4: AHCI supporting as
0xf6: PX mode
0xf8: Thermal Fan Control
0xf9: Light Sensor
0xfb: HDMI Audio
0xfc: Wireless Switch Setting
0xfd: 1394 Controller
0x113: Internal Lan Controller
0x114: USB3.0
0x115: Fusion Utility
0x116: SATA Port0 Power on
0x117: SATA Port1 Power on
0x118: SATA Port2 Power on
0x119: SATA Port3 Power on
0x11a: SATA Port4 Power on
0x11b: SATA Port5 Power on
0x11c: Force Raid Mode
0x11d: Discrete GFX Modules
0x11f: BlueTooth Device
0x120: Web Camera
0x121: PXE Boot to INT_LAN
0x123: Travis Pwr Ctrl
0x125: In-Chip IR
0x126: OHCI0
0x127: OHCI1
0x128: OHCI2
0x129: OHCI3
0x12a: EHCI0
0x12b: EHCI1
0x12c: EHCI2
0x12d: SATA
0x12e: Primary Video Adaptor
0x131: Speed Mode
0x132: Link ASPM
0x133: Speed Mode
0x134: Link ASPM
0x135: Speed Mode
0x136: Link ASPM
0x137: Speed Mode
0x138: Link ASPM
0x139: PX Fix Mode
0x13a: PX Dynamic Mode
0x13b: Hardware Thermal Control
0x13d: HTC Hysteresis Value
0x13f: Link ASPM
0x140: Link ASPM
0x141: Link ASPM
0x142: Link ASPM
0x216: D2D Recovery
0x217: F12 Boot Menu

 

I am still studying in that window, type these commands, here?

 

You are running python command prompt so you command should be:

vtenable.py back.fd new.rom

 

These files are not trying to put a specific folder? Prompt every time I perform are invalid syntax
-----------------------------

Open the Advanced menu has been successfully.....wakaka```

 

I flashed that Mod-Bios and it unlocks the advaned Menu also advanced CPU.

No change with the Brazos Tweaker (NB-Voltage still locked) and also no way for changing clocks

 

derdahinten - from where is your bios mod ? [Unlocked] Acer AO522 Bios Unlock

) have you POWER menu open ?
yes Thermal Fan control can be set from auto to disabled
and you browse all advance sub menus ? yes als sub menus are open

so what can yu set up there? You can adjust the fansettings (hysterese), enable AMD fusion-support , select CPI P-state (lowest), AMD PBS Options
Cpu advanced --> cool n qiet , Multi COre support, Thermal control
Video ---> Primary Video, Power Xpress (AMD) PC mode, HDMI Audio

and ...can yu confirm advance menus are working and saving to cmos? working and saving confirmed

 

lee480,where are you?

 

Hi all, I know this topic is very old, but I'm trying to enable VT in my acer aspire one D255E.
The problem is, when it type

Code:

python main.py original_bios.fd

I get:

Code:

  File "main.py", line 39, in <module>
    from dumpsetup import StringTable, Form, FormOp
  File "/home/you53r/Bios/hack/dumpsetup.py", line 272, in <module>
    strings = StringTable(pe, STRING_TABLE)
  File "/home/you53r/Bios/hack/dumpsetup.py", line 41, in __init__
    offsets = struct.unpack("<%dI"%count, self.data[16:16+count*4])
struct.error: total struct size too long

My main.py is this one and dumpsetup.py is this

My dumped bios file is this one.

User "sunsystem" on this post told it got it working but without providing how.

Can you please help me?

 

up
Any help, please?

 

I obviously can't reach the uploader of this modifiation anyore:
http://forum.notebookreview.com/ace...elinex-1410-1810t-1810tz-bios-mod-insyde.html

May someone please unlock the Advanced-options?

-Motherboard Manufacturer and Model : Acer 1810Ta
-Bios Revision : 3314
-Bios Type : Insyde
-Bios Link : Link

There was a tutorialfor another notebook running InsydeH2O, maybe this could help.

Thanks in advance.

 

im looking for a fully unlocked bios for a acer 1830T... i run fuduntu linux and have it maxed out with 8gb ram and a 256gb m4 ssd both from Crucial... i run alot of virtual machines and wold like to be able to use this thing to its max potential... any help would be great, thank you