Hello,
First of all, sorry for my bad english...
So, I'm and Alienware m14x R1 owner, and today I just bought a SSD for my machine, it's a Corsair Force Gt sata 3.
The problem is that no matters what I do, it doesn't appear on the BIOS, and the windows installation can't find it =(
Can someome please help me? I was using A05 BIOS, but now I've upgraded to A08..... but it's the same =(
Thank you for your help
-
smokeydogsmokey Notebook Consultant
heres a rough guide http://www.sevenforums.com/tutorials/52129-disk-clean-clean-all-diskpart-command.html if it doesnt show under list disk then its either cables not connected, drive is faulty or mb port is faulty in that order -
-
i have a 120GB force GT in my r1 on a05 working... i also had it on a voltmod bios working as well. did you make sure the firmware for the ssd is current. i think its 1.3.3 or that what i have on mine. a08 will kill sata3 speeds so i would make sure to stay under that. if its not showing up in the bois though you may have a bad drive. good luck!
-
Alienware-Frank_L Company Representative
Once you get the Hard Drive installed you can get from here all the drivers you need for your M14xR1.
Force Gt + M14x... Really need your help guys =(
Discussion in 'Alienware 14 and M14x' started by kotty, Jun 29, 2012.