Is there a reason why i can't change the bus frequency with the overclocking feature enabled?
if this is an existing thread, please close it. Thanks,
Otherwise - any thoughts?
-
um not sure cpu-z is saying i am running at 102.9 so no idea, did you adjust the bus speed in the bios
-
-
did you hit shift and plus
-
moved it, and tried to save it immediately, once, or permanent, but every after i set a value, it goes back
-
try not going into the bios after you set permanently and just boot it so raise f10 and run cpuz it will read about .03 lower than you set it
-
let me try that one.
-
The M11x-R2 has an issue where the bios overclock setting is sometimes randomly reset to the default MHz. After you boot up, your overclock is gone.
This is a common motherboard fail safe feature so if your bios overclock keeps getting reset, the M14x might also have this issue. -
Wow. thanks for this.
got it done!
-
Can someone help me?
My bus Freq is grayed out in the BIOS. It only lets me change the Hz.
Am I missing something? I followed the vid here and I can't get the Bus to allow me to change it. -
make sure you have override turbo enabled
-
-
I noticed most of my bios is greyed out IE: Everything under date and time
bus frequency
Discussion in 'Alienware 14 and M14x' started by Arklight, May 6, 2011.