The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Alienware M17X R5 fitting msata and ram slots 1-2

    Discussion in 'Alienware 17 and M17x' started by jutley, Jun 12, 2014.

  1. jutley

    jutley Notebook Enthusiast

    Reputations:
    0
    Messages:
    24
    Likes Received:
    0
    Trophy Points:
    5
    Ok so I want to get a msata disk so I can store the os on the disk and free up a drive bay for a higher sTorage ssd disk and while I am there I can upgrade to 8gb sticks in slots 1-2. what I need to know is if anyone has done this procedure I think there are 22 screws to remove in total to get under the keyboard where the msata and ram slots sit has anyone one got any tips or guides to doing this easily thanks in advance.
     
    jutley, Jun 12, 2014
    #1