Well I recently got into overclocking and was looking into good laptop stands. After a few weeks of research I realized that there weren't many good laptop stand for this laptop. especially because of the hot spots being as high as they are. I took matters into my own hands and built my own. I had an old targus chill mat xc laying around and decided to take purchase some 120mm and make them fit the stand. I bought 2 cooler master 120mm fans (not a big fan of the blue leds but they were on sale). The dba's are around 19 and the air flow is 60cfm. To power the new fans i bought a 2x12 volt ac adapter to power the fans. Then used the old fans that came with the stand and built a suction fan that is pointed directly at the cpu vent. After all this the total cost was under 20 dollars since I already had a stand. As for the temps, my laptop used to run idle at 50-52 on extreme settings level 3. Now after change thermal paste to artic 5 and adding the laptop stand I idle at 35. If any has any question about the stand let me know.
-
Attached Files:
-
-
Sell me one. How much ?
-
Buy these items and I will show you how to make it.
1. 2x12 volt ac adapter
2. 2 120mm fans
3. Line wrap, black tubing for loose wires (optional)
4. Old laptop stand
Alienware M17x R4 Custom Cooling Stand
Discussion in 'Alienware 17 and M17x' started by jackgarcia7, Nov 15, 2012.