The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Custom fan profile 880m

    Discussion in 'Alienware 17 and M17x' started by Rasmusm, Nov 4, 2016.

  1. Rasmusm

    Rasmusm Notebook Guru

    Reputations:
    19
    Messages:
    54
    Likes Received:
    3
    Trophy Points:
    16
    Hello I own a AW17 from august 2014 :)
    I recently found Out My gpu temps were a bit high.. Peaked at 91c in furmark.
    Cpu was 86c using prime95 i think it was.

    I Then repasted with IC Diamond and gpu dropped to 80c and cpu to 70c :) so that was quite Nice and Worth the money :)
    But when running furmark and temp hitting 80c i believe the gpu fan wasnt at full speed. And Id like to see if i can lower the temp even More :)

    Also My 880m only running 836mhz in furmark? I think it should be 954mhz i know it has throttle issues but srsly? 836 the entire time from cold card to Hot...

    So Id like to know if its possible to make a custom fan profile somehow with some program?

    Have a good weekend,
    From Rasmus
    Denmark
     
    Rasmusm, Nov 4, 2016
    #1
  2. Papusan

    Papusan Jokebook's Sucks! Dont waste your $$$ on Filthy

    Reputations:
    42,727
    Messages:
    29,850
    Likes Received:
    59,668
    Trophy Points:
    931
    First!! Furmark is banned by VBIOS modders and Nvidia/Amd. You can/will kill your graphics with this Junkware!! And yeah, You can make custom fan profile with Hwinfo64. As well force the fans on fully speed if you run high load from Cpu/Gpu during long time.
     
    Papusan, Nov 5, 2016
    #2