Hello,
I just received my Alienware 17x-R3 with 256 samsung ssd couple of days ago.
I decided to upgrade the OS from Windows Home to Windows Entreprise.
After the upgrade restart I started to get the Disk Read Error. Press CTRL-ALT-DEL to restart. My question is do I need to do anything special to the ssd before a windows install? I am very new to ssd so any help would be great appreciated.
I can't get into any windows installation, it just displays the error.
Help please.
Nassa74
-
I believe you have to do a fresh windows install, and change the settings from RAID to AHCI to run off the ssd.
Try looking into this thread.
http://forum.notebookreview.com/ali...install-ssd-instructions-recommendations.html -
Thanks I have actually tried that thread.
Do I have to initialize or update the firmware on the ssd?
Also, my laptop came with bios a09 but it currently has a08, I used the resources cd by mistake. Could that be the problem? -
On the bios, keep it at A08. The A09 is just another downgrade from Dell.
I'm not sure about samsung ssd's, but I know owners of crucial, ocz, and intel have had to update the firmware first. You may want to look into that. -
This morning, it only sees my drives as being 1 Gig.
Anybody have any ideas? -
Just an update....dead hard drive.
Going to send me a replacement.
Disk Read Error. Press CTRL-ALT-DEL to restart
Discussion in 'Alienware 17 and M17x' started by Nassa74, Dec 19, 2011.