The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    GTX485m black screen

    Discussion in 'Alienware 17 and M17x' started by DARCODER, Apr 11, 2011.

  1. DARCODER

    DARCODER Notebook Deity

    Reputations:
    252
    Messages:
    779
    Likes Received:
    232
    Trophy Points:
    56
    hi,
    so that's the problem:
    I run Furmark in 1920x1080, with MSAA 4x and Xtreme burning mode Stability test:
    my temp was ok, 65* but I got a black screen :/
    Also when I try OC a little too much: core 690 and memory 1560, I got black screen and need to hard reboot.

    Is it a driver problem or a gpu problem or a temp ( with pads ) problem??

    Thanks for help
     
  2. katalin_2003

    katalin_2003 NBR Spectre Super Moderator

    Reputations:
    14,963
    Messages:
    5,671
    Likes Received:
    1,521
    Trophy Points:
    331
    If the system still runs (AlienFX, fans spinning etc.) then it's most definitely a video driver issue.
     
  3. johnnobts

    johnnobts Notebook Deity

    Reputations:
    429
    Messages:
    1,922
    Likes Received:
    104
    Trophy Points:
    81
    your system is running ok now right? guess you can't oc any higher.
     
  4. DARCODER

    DARCODER Notebook Deity

    Reputations:
    252
    Messages:
    779
    Likes Received:
    232
    Trophy Points:
    56
    All is fine, when I m playing when i was in 266.08, black ops was freezing. other games not.
    Some time when I was playing fps was 122 and drop to 15. After that bsod sseing: a clock interrupt was not received on a secondary processor bsod

    Now i,m on 270.51 and black ops is not freezing. When i do the test with furmark, after 2min i got the black screen, the same if I OC the gpu more than this profile: core 690, memory 1550.

    I don,t know if it's a driver problem due of modded files or my gtx485m has a problem or it's the AW not optimised for :?