The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Removing battery running just in power

    Discussion in 'Alienware 17 and M17x' started by nall, Jul 1, 2011.

  1. nall

    nall Notebook Enthusiast

    Reputations:
    0
    Messages:
    40
    Likes Received:
    0
    Trophy Points:
    15
    Does anyone do this? I got the m17x r3 today and as I just sit at my desk this seems like the best option to me.

    (Hopefully it doesn't mess anything up).

    Also, I got all the back up discs in the box yet the computer still asked me to create my own, are the discs fine for back-ups?

    I have to say it is quite simply a stunning laptop and I've had no problems (touch wood). I saw a video of someone on YouTube talking about keyboard flex but I really can't see it. The keyboard is really nice and there is no flex what so ever. :D :D :D
     
  2. aarpcard

    aarpcard Notebook Deity

    Reputations:
    606
    Messages:
    1,129
    Likes Received:
    284
    Trophy Points:
    101
    Some people say it helps retain your battery life, others say it doesn't matter. I don't know which is better. Leave it in, or take it out. I always leave it in.
     
  3. Raidriar

    Raidriar ლ(ಠ益ಠლ)

    Reputations:
    1,708
    Messages:
    5,820
    Likes Received:
    4,311
    Trophy Points:
    431
    it shouldn't matter. in the old laptops, i know that they didn't have a charge cut off point, and it would continuous charge and discharge the batttery (this is on the old nickel cadmium/niMH battery powered laptops)

    On modern laptops though, windows has this power scheme that auto regulates this things via threshold. If the threshold is say 95% charged battery, then the system will use only AC power. if its below 95%, it will charge the battery an then switch to ac only. but when it is charged or within the threshold, teh system runs off ac power, and does not deal with the battery, leaving it untouched without excess cycles.
     
  4. ECKS

    ECKS Notebook Prophet

    Reputations:
    950
    Messages:
    4,635
    Likes Received:
    3
    Trophy Points:
    106
    Do you mean yanking out the battery while the computer is on while having the AC plugged in? It's fine, I do it all the time right when battery becomes fully charged.
     
  5. Jas71

    Jas71 Notebook Evangelist

    Reputations:
    285
    Messages:
    497
    Likes Received:
    0
    Trophy Points:
    30
    I have had mine plugged in for the better part of the last two months and I have seen no battery degradation.
     
  6. katalin_2003

    katalin_2003 NBR Spectre Super Moderator

    Reputations:
    14,963
    Messages:
    5,671
    Likes Received:
    1,521
    Trophy Points:
    331
    As long as you cycle it, say once a week, you should be fine ;)
    Consider your battery as a cheap PSU it's not made to last forever.
     
  7. Simplified

    Simplified The Most Awesome

    Reputations:
    428
    Messages:
    766
    Likes Received:
    0
    Trophy Points:
    30
    If you want to store the battery charge it up to 40% before you store it. To cycle the charge you will need to charge it up to 100% and use it until it is down on 40% again. 40% is the most stable level to store a battery.

    Leaving the battery in the computer wont affect its lifespan. The psu cuts of the charge at a certain level. Its good to have it as a backup power supply.