OK, I am dumb.. If I put a regular full size SD card in to the slot over my BD RM drive (Not in the BD slot) the SD card goes in so far that I can not reach it to remove the card without using tweezers or some other tool. the SD card does work fine while it is in there.
What am I missing? I did try "ejecting" the card from the control panel in case there was some motorized ejector.
Should I have some sort of an SD card carrier? Is there a way to "eject" the SD card?
Your advice is greatly appreciated.
-
Push it in more it should spring back.
-
Thanks, I did try that. There is no give if I try to push it in further.
-
katalin_2003 NBR Spectre Super Moderator
Are you sure It's not a miniSD?
You should be able to get it out by doing what DR said unless the spring inside It's no longer in place. -
Now I really feel dumb.. it was a "Pro Duo" card out of my camera. Interesting trivia, if you slide a ProDuo card in the SD slot it will work just fine, but you'll have the devil's own time getting it out.
-
katalin_2003 NBR Spectre Super Moderator
Thought so
Yes they do like MMC cards etc. -
Ahaha yeah I did the same mistake as well, getting that out was indeed a pain.
-
made me miss my vaio that had this little lever that centered the pro duo card into the slot. ohwell
SD Card Removal?
Discussion in 'Alienware 17 and M17x' started by Atavar, Oct 23, 2011.