Can some on confirm what voltage they have sent to their 580m GPU on the HWINFO64 GPU +12v line.
Mine reads just over 9 volts not the 12 I was expecting reading the HWINFO line.
This is on a M17xR3 with a 580m.
Thanks.
-
Mxm3.0b takes 3 different voltage lines. 5.0v-2.5A, 3.3v-1A and 7-20v-10A which depends on battery size and charge as well. 12v is coming on third line and can vary between 7-20v, so calm down, it's normal.
Not 100% sure on the voltages for oc side but it should be only for die itself. I could be completely off topic and wrong here though. -
Meaker@Sager Company Representative
If the voltage was way out you would either get really realistic smoke effects or black outs
-
Sometimes just a dead screen for a few seconds usually followed by a reboot leaving no crash dump and the "the system shutdown unexpectedly" message in the logs.
Was just trying to establish if it was the GPU at fault. -
Try keeping a close eye at temps, that 580 can build a lot of heat and if fans/heat sinks are not clean. It can do pretty crazy things to rest of the motherboard.
Sanity Check Required....
Discussion in 'Alienware 17 and M17x' started by KenFitz, May 24, 2013.