The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    m17x R1 LED Ribbon Replacement

    Discussion in 'Alienware 17 and M17x' started by sevetset, Sep 25, 2015.

  1. sevetset

    sevetset Newbie

    Reputations:
    7
    Messages:
    3
    Likes Received:
    2
    Trophy Points:
    5
    I know a lot of people have had a problem with this. The ribbon wears out or develops tiny broken connections making it unusable. The laptop is unable to turn on or display the LEDs above the keyboard. Finding a replacement is next to impossible, but I finally found one that works great! It is sold by Mouser Electronics ( http://www.mouser.com/ProductDetail...HpKagNw6kODnc3DyG2fXfDiXJZWsE/KkOzVQJTGNV4A==). It is a FFC / FPC Jumper Cable WR-FFC 0.50mm Type 1 20Pin Length 200mm, which makes it a little long, but can fit in the laptop. It costs around $3.90 USD. IT works great and I suggest that when you order get 2 or more for the future. Hope this helps out many of you looking endlessly for this part. [​IMG] :bigwink: http://www.mouser.com/Wurth-WR-FCC/
    Sevetset
     
    sevetset, Sep 25, 2015
    #1