hi, having a bit of trouble with my m17x r1.
last night it was working perfectly fine. im not sure, but there may have been a windows update (cant really remember).
tried to start it up today and get not much. fans come on for a few seconds then turn off. the lights on the keyboard, speakers and alien heads all stay on. no caps or num lock lights on at all.
nothing at all happebs on the screen. no alien head no flashing curser, nothing.
tried all combinations of battery n charger, tried taking out ram and re installing.
ive got no clue what to do now... help! please![]()
-
-
Sounds to me like you bricked your system going off your info WE CAN FIX THIS DONT WORRY. -
You could try to remove the HDDs and see if it gives any LED code combination.
If you get blinking LED's (Caps, num or scroll) check the link above for further info on what the error means. -
have tried without the cmos battery, without the hdds or ram, and still get the same thing. no beeps or extra lights at all.
-
left it a few days and itll boot now (only with the ac adaptor disconnected, after it boots it works fine hooked up) seems to be a problem with one or both of the 280m's as itll start on the vga adaptor with the intergrated graphics disabled. think its about time for an upgrade an haha
-
-
yea, no worries, been pretty busy myself. Had some time today to have a play around. Re-installed the drivers like you suggested and it seems to be working fine now, thanks.
While im happy that its working again, it would be better if i knew why it did all this in the first place :S -
-
the thing seems to still have issues. hooking it up to my tv with the hdmi seems to kill the hard drives. apart from that its not too bad. no new games yet... none really appeal at the moment, battlefield is still going strong.
have a good christmass everyone -
possibly narrowed it down some more. seems my charger is stuffed. im getting the correct 19v at the side of the plug, but im getting 6v at the center pin... another charger works on it (way too small though) and theres no voltage at the pin.
m17x R1 not making it to post
Discussion in 'Alienware 17 and M17x' started by smiley_666, Dec 14, 2012.