hi guys
i remeber that reading some old posts that this ssd was unstable
i remember there was a thread about how to install it but i cannot find it
can someone help me pls
thank you
-
hope someone helps you so I will see that thread too
What I know is:
update to last firmware using Windows.
When you format it let 64 MB unformatted space at least for selfcaching.
Format it only using Windows 7 for proper alignment.
I don't even know what else. -
I spent a lot of time getting Vertex 3 running properly, but without success. No BSOD, just freezing all the time, had to return it.
-
katalin_2003 NBR Spectre Super Moderator
You have some info here:
http://forum.notebookreview.com/alienware-m17x/594674-ocz-vertex-3-frezes-help.html
http://forum.notebookreview.com/ali...-iii-vs-intel-510-120gb-sata-iii-m17x-r3.html
Hope it helps, good luck. -
-
@Airacuti. I saw 1 guy offered to leave 64 MB unformatted space on this SSD. Maybe you try to manage a clean install again? I saw you are OK with that cause had enough practice
-
-
ty all guys i will try to install it today :S
-
Good luck! Tell us ASAP results
-
it was a headache
i need to reinstall windows on my normal hard drive and installit on ahci then upgrade the ssd with a program from ocz then install windows ahci on ssd then after first reboot go to bios change raid then let finish instalattion on ssd and it was all it took a couple of days to figure out to go ahci and update firmware on ssd but that was all i dont have blue screen and nothign all is working perfectly and the reading speed is 500 m and writin like 200 so its super fast thank you all guys for the posts and help tell me if u want +1 rep
ocz vertex 3
Discussion in 'Alienware 17 and M17x' started by Aoyarvide, Aug 21, 2011.