The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Programs to stress GPU & CPU?

    Discussion in 'Alienware M11x' started by BrokenKeyboard, May 16, 2011.

  1. BrokenKeyboard

    BrokenKeyboard Notebook Consultant

    Reputations:
    10
    Messages:
    196
    Likes Received:
    0
    Trophy Points:
    30
    Going to overclock my R2 to the max, what programs should would fellow users recommend I use?
     
  2. DavyGT

    DavyGT Overclocker

    Reputations:
    496
    Messages:
    900
    Likes Received:
    0
    Trophy Points:
    30
    IntelBurnTest with 4 threads and maximum stress should stress the CPU.
    Use OCCT to stress the GPU. Make sure you right click and select "Run with: nVidia graphics" though as whitelisting doesn't work. Not sure if Furmark is now limited in the drivers to reduce load.
    As intensive as OCCT is, a run of 3DMark06 will sometimes expose instability after a successful run. Probably due to it stressing the VRAM more.
     
  3. BrokenKeyboard

    BrokenKeyboard Notebook Consultant

    Reputations:
    10
    Messages:
    196
    Likes Received:
    0
    Trophy Points:
    30
    Thanks a lot, Davy.
     
  4. BrokenKeyboard

    BrokenKeyboard Notebook Consultant

    Reputations:
    10
    Messages:
    196
    Likes Received:
    0
    Trophy Points:
    30
    I can't get 3DMark06 to use the 335m. I right-clicked and chose to run using the 335 and still nothing. 335 is my default.
     
  5. discothan

    discothan Notebook Guru

    Reputations:
    1
    Messages:
    71
    Likes Received:
    0
    Trophy Points:
    15