correct. i am using the 32 bit version without any issues so far
-
Without issues like screen doesnt scale in other resolutions that the native one ? Cause i gave it a go about 5 hours ago and i still had that problem.
-
i ran 3dmark06 after installing them and it was fine at any res i ran it at?? i didnt have any issues with the last ones either though. what issue do you have exactly
-
For eg when you try run a game in other resolutions like the native one, like for eg 1680x1050 (even the desktop) dont take the whole screen. Theres like a box around the screen.
-
what about with 3dmark? i did not have that issue at all with 3dmark. ill have to try some games on it tomm and see if i get different results. but at any res i tried 3dmark ran fine with no black border, and the desktop is fine at any of the lower reolutions
-
I think there are two or three different resolutions (including the native one) that actually scale to the whole screen. One of them might be the 3dmarks default one. Try set it to 1680x1050 which im sure theres a problem with that resolution.
-
Yep...mobmod does that res crap still.
Finishing up drivers right now to upload - gimme a few minutes. -
same result at 1680 i still have a full screen not sure why it works for some and not for others
-
Yea i wonder the same thing too. There are people that never had that issue. But there are people that do and the strange thing is that its on the same laptop. Its not a software issue for sure since ive tried after a clean windows install and still had the problem. Not exactly sure whats the problem.
-
zfactor, dont run 3dmark man.. that's not a good test. just right click the CCC and change your screen res to 1680x1050 - it will letterbox
-
on a side note.. My QX9300 came in today! Woot! However, since I wan't home they left it at the Post Office for pickup
But, it's gonna be in this rig tomorrow
Testing 64bit mod before going public.. I'll then mod 32bit with same settings. gimme a few minutes. -
Hehe new cpu and a new drivers, what more can you ask ?
-
Haven't seen you in a minute CooL.. you must be around for new drivers yourself
What's shakin?
-
im sorry e wrecked ...i know that gate way doesnt game like ur old whitebook ...sigh....i guess my computer is just better then yours now
BTW hi cool -
yah mobmod and any of the ATI have not given me any resolution scaling problems..
-
same herei only have gone up to 1440 because i dun have a hdmi cable with me
-
Yea been busy with some issues, had to travel a lot. Should be back and active in a few weeks (hopefully)
Of course im always checking the forum! -
lol i havent been as active school killin me i have to push through the last semester to get the scholarship but glad e wreck told me there was new drivers
btw do you have to pay to use CoD world at war online? and can you play x box live people on your pc ? i haven't delt with pc games online....allllso do yall thing hughes net can run online games such as halo 2 CoD and fallout -
-
If its the same as CoD - MW then you just need to buy the cd (to get the original cdkey). After that you can connect in any server you want without a monthly fee or anything. As for the xbox, i dont think you can use the pc version to play with people that are using an xbox/ps3
-
Im having issues
-
What kind of issues ?
-
would take longer to type than to fix.. I'll get it working.
-
Take your time
I prefer a stable version over a rushed version
-
gotta get hime to install it on his m9750 now hahahahahah
so what about satilite internet ? can it run it -
Ok.. y'all bear with me. I made several revisions last time. I'm gonna finish this up tomorrow. Like you said Cool, needs to be right.
So, how you diggin that M17 Moo? -
i loveeeeee it ive hit 78c tonight playing crysis warhead lol for 1 hour its the highest though, fallout 3 on 1440 ultra high stunning
but crysis warhead only runs at 1280 at mainstream pc graphics settings with 20-30 frames per second usual about 22 fps is that good? i have it set to maximum power and max power in ati
-
Hmm. I'd expect it to do better than that. Much better. Catalyst AI enabled?
-
WooHoo! Friggin Right
I got it to install properly - all Cat options unlocked - All resolutions enabled.. ALSO - I added 1280x800 for julianGonna zip and upload - may take a bit to upload.. new thread coming.
-
Dont forget the 32 bit version while your uploading those
-
Okie.. just began the new thread.. Gonna catalog all my mods there - and keep it organized. Rush through it for now just so the links are up and everything is good to go. Will do the 32bit as well Cool, no worries
-
Btw
did you notice any difference ? Didnt see a lot people saying anything good about them. Except from some changes in new games like for eg Mirrors edge that needed a rename to run properly
-
Didnt run since the mod.. Just modded and uploaded.
Hey..you downloaded the 32bit version yet? I need to you test this .inf - mobmod the install package after extraction..then drop this .inf in there and replace the desktop driver. Then run setup and lemme know how it works. You remember how, right?
-
http://ewrecked.darksmileysystems.com/CL_74233.zip
There's the modded inf - drop it in after the mobmod and lemme know -
Great
Brb in a few mins, gonna install it, run a 3dmark and 2-3 games just to check the fps
-
Hmm, this is strange, after I installed 9.1 I've gotten over double the frame rates that I used to get in Mirror's Edge.
Before - 30 FPS
Now - 60 FPS
-All game settings are the same and CCC AI is set to standard like always.
What gives? -
Mirrors edge had a problem with crossfire. Renaming the .exe file manage to get the job done. Now they added a profile for the game so renaming is no longer needed in order to make crossfire work properly.
Finished installing, scaling works, on to the fps tests -
I have tested mine and I still get letter box on anything less then 1920x1200. -
Did you use the drivers E-wrecked just modded ?
-
this driver has a problem with vantage.. just like the Hotfix driver. Actually, this also scores REALLY close to the Hotfix on 3dmark06 - And the driver dates are also similar. I think ATI just tweaked the hotfix SLIGHTLY and re-released it. This is the Hotfix driver from 8.12
Anyhow, it's modded and works fine otherwise. Y'all download and enjoy.
-
-
here's the new thread with the modded drivers:
http://forum.notebookreview.com/showthread.php?t=347611
Once cool verifies 32bit, I'll post the download link for it as well.. I've verified 64bit - and as I said I also added 1280x800 for julian. -
Waiting for Framework 3.5 Sp1 to install. I hate micro$ost's timing lol
Should start testing in 2-3 mins after the restart -
Love this new mod, visual bugs/glitches have all if not disappeared since!
-
Eh? Which? Mine?
-
Greetings
Julian
Edit: a little test between AW 8.12 and 9.1 ok have to upload it later sry^^ (it's Crysis gpu benchmark) -
just for you buddy
-
so:
First 8.12 from AW
Second 9.1
I don't know why it says @ 5 hour and on the other 9 ... in the test everithing was the same (you can see it right at the top)
Greetings
JulianAttached Files:
-
-
erm ? 1000+ fps ? Think something is wrong here
-
Greetings
Julian
Edit: I could imagine that this "OVER ALL FPS" is more or less the "over all frames" during the 3 runs @ one resolution ...
ATI Catalyst 9.1 Official Release.. Finally?
Discussion in 'Alienware' started by E-wrecked, Jan 29, 2009.