ATI Catalyst Display Driver 9.5 for Windows 7 Mobility is here now

ATI Catalyst Display Driver 9.5 for Windows 7 Mobility is here: http://depositfiles.com/files/rb3kdsq3n

1. Download and unrar it.

2. Install the Driver by Disk method, described here: http://forum.notebookreview.com/showthread.php?t=364393
Locate file: 9-5_win7_64_dd_ccc_wdm_enu\Driver\Packages\Drivers\Display\W76A_INF\C7_80269.inf

3. Run setup.exe and install Catalyst Control Center 9.5

This Driver was tested and it works fine with Windows 7 RC1 7100. Good Luck!


Updated for VISTA and Windows7 32 and 64 bit:

Now there is no necessity to use Disk method, all you need to run setup.exe

ATI Catalyst 9.5 Software Suite Vista & Win7 32-bit Mobility:

http://depositfiles.com/files/eeq9enz3a

ATI Catalyst 9.5 Software Suite Vista & Win7 64-bit Mobility:

http://depositfiles.com/files/rn5tyb6co



For Notebook Enthusiasts :laugh: :

ATI Catalyst 9.5 Software Suite Vista/7 32-bit:

http://www.techpowerup.com/downloads/1390/ATI_Catalyst_9.5_Software_Suite_Vista7_32-bit.html

ATI Catalyst 9.5 Software Suite Vista/7 64-bit:

http://www.techpowerup.com/downloads/1389/ATI_Catalyst_9.5_Software_Suite_Vista7_64-bit.html

And :yes: NEW:yes: Mobility Modder v1.2.0.0 with support for Windows 7 drivers and fixed problem in driver modification with the 9.2 and higher drivers:

http://www.driverheaven.net/modtool.php

 

Thanks sky7....I might have to give it a go! Can anybody say for sure whether this has fixed the driver issue with the ATI 3870 crossfire using Windows 7??
I suspect it has fixed the issue but Im gunna wait till somebody says for sure.

thanks for the link.

 

I confirm that this driver has fixed the issue with ATI 3870 Crossfire using Windows 7 RC1 7100.

 

Thanks Sky7 for that confirmation.

 

Does it work even with Vista?

Tks.

 

No, this driver is only for Windows 7 and it's only for 64 bit.

 

how about a vista32 version

 

Now there is no necessity to use Disk method, all you need to run setup.exe

ATI Catalyst 9.5 Software Suite Vista & Win7 32-bit Mobility:

http://depositfiles.com/files/eeq9enz3a

ATI Catalyst 9.5 Software Suite Vista & Win7 64-bit Mobility:

http://depositfiles.com/files/rn5tyb6co



For Notebook Enthusiast :laugh: :

ATI Catalyst 9.5 Software Suite Vista/7 32-bit:

http://www.techpowerup.com/downloads/1390/ATI_Catalyst_9.5_Software_Suite_Vista7_32-bit.html

ATI Catalyst 9.5 Software Suite Vista/7 64-bit:

http://www.techpowerup.com/downloads/1389/ATI_Catalyst_9.5_Software_Suite_Vista7_64-bit.html

And :yes: NEW:yes: Mobility Modder v1.2.0.0 with support for Windows 7 drivers and fixed problem in driver modification with the 9.2 and higher drivers:

http://www.driverheaven.net/modtool.php

 

+REP , works great with my HD3650

 

Ok, call me silly but which of these links is the already MobModded version for Vista 64? The second set says "mobility" and the third set says "For the Notebook Enthusiast" with another link to the new MobMod. Are any of these repackaged, and already MobModded?

 

The second link i think, i have used the first, Vista 32bit and it works great.

http://depositfiles.com/files/rn5tyb6co

 

This one http://depositfiles.com/files/rn5tyb6co is already MobModded version for Vista 64

 

Tomorrow evening i'll give it a shot with my HD4850.

If it works + rep for the willing Sky7.

For now, many thanks dude!

 

Does the Vista ones scale properly with lower resolutions than 1920x1200 ? (1680x1050 for eg) ?

 

i tried the Catalyst 9.5 driver 64 bit Mobility and got an error message that there was no INF file and drivers did not load. Help!

 

Had that problem a few times as well tanamerra. Did you do only one restart ? Try two restarts;p Uninstall, reboot, wait till windows fully load then reboot and then try to install the drivers.

It has something to do with Vista trying to load the default ones the first try you reboot and conflicts with the installation. After the 2nd restart it seems to work just fine with sky's 9.4.

 

Thanks CooLMinE. Will give it a try that way.

 

CooLMinE,
Good suggestion. it worked. Xie xie. (Thank You)

 

i have a scaling (resize) issue with this drivers in windows 7 7127 64 bit.

any idea to fix ?

 

This driver was fixed for no scaling issue and it works correct in 1920x1200, 1680x1050, 1440x900 and 1280x800 in Win7 7100, 7127 x64. If you mean all different resolutions, that's right, this problem exists for Win7.

 

official 9.5 realesed from ati.. i am trying that for this ugly resize issue.

 

nope it is same.. i hate that black borders ...

 

Modded 9.5 catalyst driver for ATI Radeon HD 4570 (XP 32-bit) - http://rapidshare.com/files/235807494/9-5_xp32_dd_modded_ATI_Radeon_4570_Mobility_Drivers.rar

 

http://forum.notebookreview.com/showthread.php?t=383118

It worked for me..

 

Had a lot of free time today so i gave them a shot. They installed just fine, 3d marks scores are a bit higher than 8.12's. Starting game performance tests now.

Also scaling works

 

thanks alot for vista driver

 

thanks for the vista driver

 

I've just installed drivers on my acer 5530g with windows 7 and ati mobility radeon hd3470 hybrid x2... and there is a problem because ccc detects hd3450 which is a bit worse than my 3470 . Any ideas how to properly install drivers? I ve tried twice and the result was the same.

 

Open CW_80268.inf (for Win7 32 bit) or C7_80269.inf (for Win7 64 bit) and delete this line "ATI MOBILITY RADEON HD 3450" = ati2mtag_M72, PCI\VEN_1002&DEV_95C4. Then install the driver.

 

Hey guys I'm running Windows 7 64 bit and when i tried installing these drivers it said it wasn't compatible. Any ideas?

 

I deleted that line, uninstalled ccc+drivers and installed it again but result is still the same " i have 3450 instead of 3470 hybrid x2"
btw i have w7 64bit
In win xp 32bit ccc detects 3470 hybrid X2....

 

After uninstall driver reboot your system in Safe Mode and run Driver Sweeper http://www.guru3d.com/category/driversweeper/ or (and it will be better) install driver on clean system.

 

It didn't work -.-. I uninstalled ccc-> restarted_> cleaned drivers, manually uninstalled graphic drivers from device manager > restarted> installed ccc again and I still have 3450 + 3200 . Because of that i cant watch movies from blu-ray disk on my 24" screen -.-.
Is it possible that those drivers dont support 3470hybridx2 ? I didnt see that graphic card in the list in c7_80269.inf file.

 

Venor ID of your card is 1002 and Device ID is 95C4, right?
There is "ATI MOBILITY RADEON HD 3470" = ati2mtag_M72, PCI\VEN_1002&DEV_95C4 in C7_80269.inf, right? You can change this line for "ATI MOBILITY RADEON HD 3470 hybrid x2" = ati2mtag_M72, PCI\VEN_1002&DEV_95C4 ("ATI MOBILITY RADEON HD 3470" or "ATI MOBILITY RADEON HD 3470 hybrid x2" are only names and you can write there all what you want).
After you deleted line "ATI MOBILITY RADEON HD 3450" = ati2mtag_M72, PCI\VEN_1002&DEV_95C4 from C7_80269.inf there is no more information about HD 3450 in driver and HD 3450 can't be installed. So, i think that the problem is wrong uninstalling. Can you install the driver on clean Windows? If no, go C:\Program Files\ATI\CIM\Bin64\setup.exe Choice Delete. Then reboot in Safe Mode. Run Driver Sweeper. Mark ATI - Display -> Analyse->Clean(several times). Reboot. Install driver.

 

hd3200 Device id = 1002-9612 according to the gpuz information
hd3470 =1002-95c4

BTW i ve installed that windows 7 Today

Installed w7 again and now i have 3470but not hybrid omg its so weird

 

http://game.amd.com/us-en/drivers_catalyst.aspx?p=xp/mobility-xp

ATI Catalyst™ Mobility 9.5 Display Driver for Windows XP Professional/Home Edition Date Posted: 9.5 5/15/2009
Graphics technologies supported, most recent: ATI Mobility Radeon™ X1800 XT

That's good news... sort of... they release 9.5 for X1800 now... so X1800 has about 3 years... in 2012 we will have 10.5 good updated bug free drivers

 

Hey guys im new to this forum and i'm also new to ATi cards,

recently i purchased a notebook with the following specs :

GPU : ATi HD4650 1GB DDR2
CPU : AMD Athlon x2 64 2,10ghz
RAM : 4GB DDR2 RAM
HDD : SATAII
OS : Windows vista Ultimate 64-Bit

My ATi catalyst driver is kinda old, so i wanted to update it. i tried this one

--> ATI_Catalyst_9.5_Software_Suite_Vista-Win7_64-bit_Mobility

I removed the older one, was 8,5 i think and then i rebooted my notebook, and installed the one shown above, and when it rebooted again and windows came up the resolution was massive and i couldn't find the ATi catalyst nor the driver or screen adapter :/

and when i try to install my older driver it does the same...it tells me that the installation is done and asks me to reboot, when i do so i see nothing, i cant fix the resolution nor can i see the name of my GPU lol, meaning the drivers aren't installed.

Can anyone help me with this?

Thanx in advance, Peace

 

The downloaded drivers from ATI do not work on Vista without Mobility Modding them first.

Try the 9.6 ones from ATI instead, although the ones you tried should work (They've already been Mob-Modded) but 9.6 had some extra tweaks for the higher end cards.

 

Could you link me to a good one that i should try?

Man this is the first and last time im gonna buy an ATi product

the fact that they arent making mobility drivers is stupid enough..

 

They do for Windows 7 and they are even great^^

Greetings
Julian

 

So if i install Windows 7 64bit then all my problems are solved?

and where do you get windows 7 ? do you guys use the beta trial version or do you get em off of newsbin or torrent websites xD?

pm me plz

 

What problems ?

Torrents and other illegal activities are prohibited in these forums. But downloading an illegal copy of something you can get legally from the ms site is just silly...

 

Umm...I did link it...look again. Its not that hard.

 

I didn't say im gonna download it, i just asked how you guys got it.


@Marvie100

Marvie the one i tried was already modded, so do you want me to download ATi 9.6 now ? from the official AMD website and Mod it ?

 

http://www.microsoft.com/windows/windows-7/download.aspx should do the trick, not sure if its "wise" to install it now since the actual windows will be out in a few months. Except of course if you dont mind formatting again in 2-3 months

 

Yes, sorry I wasn't real clear in my initial post. 9.6 was enhanced for the 4xxx series cards and might work better. Try downloading the desktop 9.6's from ATI, mob modding them, and installing those to see how they work for you.

 

Thanks for replying Marvie100, though the thing is....the Modder doesn't support my HD4650 so i've read

@CoolMinE

you too man, tnx for replying...so your saying everyone that is using windows 7 at the moment is using the beta/trialed version :O ?

 

Yeap, all of those people will make a clean install of Windows 7 final release as soon as it comes out Well that would be the wise thing to do

 

Microsoft has also stated that you won't be able to do a simple "upgrade" from the RC to Official versions, you would have to do a re-install. Making it not only "wise" but "mandatory".

 

I see, and did you read the rest of my message Marvie100 :#