The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    CPU-Z 1.52 Beta and M17

    Discussion in 'Alienware' started by HaloGod2007, Jul 15, 2009.

  1. HaloGod2007

    HaloGod2007 Notebook Virtuoso

    Reputations:
    461
    Messages:
    2,465
    Likes Received:
    0
    Trophy Points:
    0
    Can anyone download the 1.52 cpz beta and tell me what the core voltage shows for their QX9300? im showing 1.2v and it should be at 1.313v. I hope its cpuz, otherwise we have been reading the wrong voltage for our m17 cpu's
     
    HaloGod2007, Jul 15, 2009
    #1
  2. cookinwitdiesel

    cookinwitdiesel Retired Bencher

    Reputations:
    4,365
    Messages:
    11,264
    Likes Received:
    263
    Trophy Points:
    501
    on it. will report back shortly

    reporting back:
    It is toggling the voltage properly.

    This cpu voltage can range from 1.05 to 1.175 Volts normally. I believe the OCZ bios enables up to 1.20 volts. Which is what i read when under load.

    here is the cpu page which shows the voltage range:
    http://processorfinder.intel.com/details.aspx?sSpec=SLB5J

    Glad to have a current WORKING version of this finally
     
    cookinwitdiesel, Jul 16, 2009
    #2