IUNLOCK Re paste Review

Hello every one! I have been a long time reader on this forum and have just a few post under my belt. I wanted to buy out a little review with my experience with the process.

Here's how it went.
I sent him the laptop via FED EX and gave him the tracking number. He quickly replied saying he will kelp and eye it so we could grabs it ASAP.

Out for delivery he sent me a message before I was even able to see the shipping status telling me he is there waiting for the page and will confirm when he gets it .

The laptop showed up and he sent me a bench test for the before . My system had a huge temp difference it would over heat in an after of 2 or 3 min on prime 95. I though I was going to sen it back . iunlock told me not to worry and that the computer was in good hands! Here is a before photo .

What happened next was he dug into the system communicating the entire time it was crazy!! He told me every thing he was going as he was doing it ! I was blow away it made me feel like I did the right thing by sending it to him. It's like he is OCD about what he's doing . (In a Good way). I think he spend the entire night working on my system! I'm not sure he even sleeps! Then I get my system and look at this result !!!

This thing is amazing now !!! The fan noise has gone way down and the system runs like a monster ! I'm so happy about this system now . I wish dell would do this from the factory or at least make it some want close .

All and all I have to say this was one of the. Eat services I have used and I'm so so extremely happy with how the system came out . I highly recommend using his service if you want your system running the right way! This thing is amazing !!!!!!


Sent from my iPhone using Tapatalk

 

This is a song of love

 

To add, in the first screen shot, the laptop couldn't even get past 5% when it was stock lol...

His laptop is a strong unit. @Cerreta28 lucked out with a CPU that can handle a nice UV and a GPU that can hold its own as well.

 

Please tell us results after 3 months because we still don't know about longevity of Grizzly Conductonaut. We will be grateful.

 

I'll report back


Sent from my iPhone using Tapatalk

I admirer good work lol


Sent from my iPhone using Tapatalk

 

Damn. That's a drastic improvement in temps. Good work Iunlock

 

Been using grizzly conducto on my 1080 which is constantly pumping 210~280w during warframe and 200~240w BF1


Temp still within wrror margin compared to when I first got it 15th may 2017

 

You got it in the future? No wonder temps are the same!

Sent from my OnePlus 1 using a coconut

 

Oops

 

@Cerreta28 Aaaand? What are the results?

 

Wish Iunlock lived in Europe

 

I've been trying to get in touch with these guys to get my 17R4 done as well, but have had no luck reaching any of them.

 

What did they do? Re-paste and under volt?

Sent from my SM-G955U using Tapatalk

 

Try the LiquidHz Discord Channel.

iUnlock offers a repasting and modding service.

 

I've had my 13 R3 for months and haven't had an issue with temperatures increasing - I wouldn't worry about Conductonaut degrading.

 

Try bro @Mobius 1 And please don't listen to rumors from some here. A very clever man.

 

Yeah, right... 'Rumors'...
Openly encouraging fraud and illegal activity is hardly a rumor - nor is the fact that he is being investigated by Dell because of that. Personally I would not trust him with any system of mine.

 

You about this. There are several here and other places who have only good words about bro Mobius.

 

And just as many people distrust him.
The irrefutable fact is that he openly suggested others commit fraud and has been blacklisted by Alienware/Dell because of it and banned from their Discord and other communication channels - something that people should take into account before sending anything to him.

 

It's easy being banned by Alienware/Dell No one should be denounced before they are sentenced

 

Even if that is the case, personally I haven't seen anyone have any issues on the Discord but have heard of bans on other media that, provided that there weren't details being left out, I would disagree with, that doesn't excuse his behavior or change why he was banned.

You can keep exalting him all you want but that is not going to alter what happened or the fact that his trustworthiness has been called into question and I cannot recommend his services to anyone after what has occurred.

 

Möbius is being denounced here because he advocated illegal activities. This called his personal integrity into question and is something that should be told to people who are considering sending systems to him (because, and you might disagree, I wouldn't send a laptop to someone who unabashedly advocated fraud).

 

You talk a lot about Fraud. This isn't the first time a see. Same from several Aw owners. They use it to get MB replacement due the well known TRIPOD mess.

 

What kind of illegal activities did he advocate?

Sent from my SM-G955U using Tapatalk

 

Thanks mate. All for the love of the sport and cheers to that.

I have several systems with LM magic floating around Europe... @Pete Light is the only guy I would recommend reaching out to in that part of the World that I know personally, who would do a good job.

Feel free to PM.

It'd be best to not open that can of worms. Info. can be found through proper channels.

I have several systems that have been LM'ed for over a year now and there are zero issues. This includes my MBPr, XPS 15 and AW laptops.

The only time LM can get a bit out of the norm is if there are gaps...which at that point is a given.

LM if done properly works wonders and will likely outlast the laptop as it doesn't deteriorate like traditional paste(s).

 

Nothing in the post you linked indicated that the poster was suggesting an unapproved or otherwise illegitimate motherboard exchange, in fact the original poster had talked to Dell and they were going to replace the heatsink and motherboard, so I don't see how that is relevant to the issue at hand. There is a huge difference between repairing systems with legitimately obtained parts and using stolen or otherwise illegally obtained ones (e.g. ones obtained through defrauding Alienware/Dell).

Also, even if it was a common practice, it doesn't change the fact that what Möbius endorsed is illegal and could have very real legal consequences. Plus, again, would you trust your system to a person who openly suggested fraud and theft?

I know I wouldn't.

Without going into too many details, fraud, return fraud, and theft.

 

Is this thread about feedback ? Theres a feedback section of the forums for company reps and such as well as regular users.

Anyways sorry for derailing, but seems some have derailed it already.

As for feedback, I thoroughly enjoy @iunlock as a person and fellow enthusiast, while I never used his services personally, I know the type of work he does and person he is, because I view many similarities in the details he gives me, when we chat, and I know where he is coming from, so i am 100% willing to trust him, had I any need for his services personally. I personally believe he will in time have a long standing history like mine dealing with many customers and it will show for itself if it has not already in fact. I think, in terms of offers any 3rd party services, we're roughly been at it almost the same amount of time, maybe I am just slightly ahead of him and the LHz team, with graphic services specifically..

Now as for @Mobius1 , who has a long standing history of also helping people on NBR with troubleshooting issues and random tech support as well as sending people in the right direction - I don't see how anyone could hold a finger pointed at him like he is not trust worthy. I'd personally give him a chance in a heart beat if I needed it. Been years I've shared these forums with him and spoken to him at length many times.
I do not know what the current issue is with anyone talking about him or fraud, and not like I want to get involved, but if it involves DELL, back in the day - there are MANY MANY of us who have had our issues with the big company. I had so many long standing issues with them its not even funny. I always encouraged people to stand thier ground against them, if you have issues with quality. I had a laptop once catch fire on my desk while I was on the phone with tech support, while they were connected to it, remotely, no joke. Still took 6 more laptops sent to me before they gave me one that was not broken to begin with, anyways I've beaten that dead horse to death and back so many times I think we should change my name to threadomancer or something on the topic... (like I said I don't know the story, just that it involves DELL)

 

Because he's proved himself to be untrustworthy? It doesn't take a genius to see that someone who is willing to lie and defraud and encourages others to do that same might not be the person you should send your systems to much like someone might not trust Bernard Madoff with an investment - but maybe I just have unreasonable ethical standards.

Then why bring it up? Your post comes off as a tacit absolution of Mobius even though, as you said yourself, you don't know the details and might have a different view if you did (since Mobius was not an innocent victim and wasn't censored for trying to fight for better quality control).