qx9300 overclock settings M17X

for those that have the QX9300, would you care to post what you have your overclock settings at?

I been playing with it and so far the highest I can get that is stable is 2.88 That is at 10.5 1333 mem and 1100fsb. When I go to 3.06 it will run all test fine but if you reboot the system it will crash during shut down?

Thanks for all your time and effort to help

 

set your memory @ 1066 then try

most have said FSB pumping is the best way to go....

 

i get around 2.93, i use 9.5x multiplier, 1333 mem, and around 1222 fsb

 

all I did was change the multiplier to 11 and left all other settings stock and I am @ 2.93 and 100% stable! Temps ok also....never over 70C

 

Thanks Guys!

 

hi

if you OC this laptop and you go to far and it wil not boot what you need to do then ? by pc you can take out jumper

my M17x runs now on 2.93ghz multiplier 11

 

If it fails to restart I have read to pull the motherboard battery, However I had this happen to me and I pulled the regular system battery out and held the power button for 5sec. I was then able to go back into bios.

 

oke thx

you got same m17x als i my run on 3.06ghz to now

 

Let me know how yours runs at 3.06 I can do full benchmarks and play games, but if I have to shut down the system, it will blue screen on me right before it shuts down.

 

nope my work all find even when i turn him of

when i run 3dmark06 + 100% cpu burn programma same time cpu hits 74c max and no blue screen of dead

and by normal game cpu hit 60c

 

here is the qx9300 with 12 multiplier and 3.20GHZ!!!. i reached that for 2 minutes until a blue screen appeared. it just for viewing purposes. i havent changed anything on fsb or something else.

 

Did you update to the A01 bios and try again Aristotelhs2060 ?.

 

oh! new bios? no i didnt see that. what the new bios offers?

 

Its in the thread right below this one

http://forum.notebookreview.com/showthread.php?t=404769

Moo reported higher overclocks from the sound of it so you may want to give it a whirl.

 

still the same with new bios. stable 3.07ghz. 3.20 only for 2 minutes until i got the blue screen.

i believe except the fixes they added slic 2.1 for win7

 

o nice.

 

same here i set mult on 12x all oke then i restart m17x i get BSOD

but if i try oc my cpu with FSB say 11.5 mult then i try set FSB on 1070 wil i get then 3.1ghz ? onlye thing is if i unlinkt it in bios to OC with FSB my ddr wil go on 1313mhz ?