The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Asus GM501GS slight vibration at the palm rest under load

    Discussion in 'ASUS Gaming Notebook Forum' started by Dennismungai, Nov 12, 2018.

  1. Dennismungai

    Dennismungai Notebook Deity

    Reputations:
    785
    Messages:
    933
    Likes Received:
    867
    Trophy Points:
    106
    Hello fellows,

    For other owners of the aforementioned notebook, has anyone noticed a somewhat slight but noticeable vibration at the pam rest when the notebook is under load? Playing some games, ie Battlefield 4 and Battlefield 1 makes this all the more noticeable.

    Earlier on, I came across a post on Steam community regarding the same issue, but on a different ASUS SKU: https://steamcommunity.com/discussions/forum/11/622954747289298502/

    Is there a way to diagnose this thoroughly? Considering that these laptops lack manual, fine-grained fan control save for the three presets (silent, balanced and overboost), I can only reproduce this effect when the machine is under load that makes the fans spin. That's the closest thing that comes to mind, considering that my build has no mechanical drives in place.
     
  2. Support.3@XOTIC PC

    Support.3@XOTIC PC Company Representative

    Reputations:
    1,268
    Messages:
    7,186
    Likes Received:
    1,002
    Trophy Points:
    331
    Are all bottom contacts touching the surface it's sitting on? That's the only thing I can think of that would cause it to vibrate when the fans are at higher RPM.
     
  3. Dennismungai

    Dennismungai Notebook Deity

    Reputations:
    785
    Messages:
    933
    Likes Received:
    867
    Trophy Points:
    106
    I'll re-check and retest.
    As I recall, it was on a wooden table.
     
  4. Support.3@XOTIC PC

    Support.3@XOTIC PC Company Representative

    Reputations:
    1,268
    Messages:
    7,186
    Likes Received:
    1,002
    Trophy Points:
    331
    A good way to check if this is the case is if you've got a softer or more springy work surface like a rubber hobby mat or something along those lines to run it on, since this can dampen the vibration.
     
    Vasudev likes this.