At last G73 vBios Update {GSOD FIXING}

FIX YOUR GSOD'S


Thanks to Gary key we now have a GSOD fix for the G73 Vbios update. Follow these instructions.

This solution is to fix the GSOD problem that has been reported. It is provided as is and will only be supported by yours truly until officially released on our support site. If you are not comfortable flashing the vBIOS on the G73Jh and have a GSOD issue with drivers other than those at the ASUS support site then I highly suggest you contact our Service group to arrange a RMA. Although every precaution has been taken to ensure the safety of this flash, there is always the possibility of a failed flash due to power outage, hardware modifications to the unit, or simply bad luck.

That said there are three compressed folders within the downloaded file - 93vBIOS.rar. The fine people at HP produced an excellent USB Disk Tool that allows you to create a bootable USB Flash Drive and this program is located in the HPUSBDisk.rar folder. In order to create a bootable drive you will also need the required DOS files and the great personnel at Microsoft provided the files in the Win98boot.rar folder. Extract both folders to your hard drive and open the HP USB Disk tool and follow the instructions to create a clean bootable flash drive. Additional instructions on how to do this are easily available via Google. After creating the bootable flash drive (FAT32 is the safest option) then you will want to extract the three files listed below to this drive.

For those of you who already have a bootable USB Flash Drive then you will want to extract the atiflash.exe, BR3852.001, and Vflash.bat files to this drive. Now you are ready to wave bye bye to the GSOD blues.

1. Insert your bootable USB flash drive with the 93vBIOS.rar contents extracted on to it.
2. Reboot and quickly start tapping the Delete key to enter the BIOS. You will want to navigate to the Boot section of the BIOS and then change the Hard Drive boot settings on Option 1 to your Flash drive. Exit the BIOS while saving the settings and the unit should boot of the USB drive now.
3. Once you have booted off the USB drive, simply type VFlash and you should see a flash completion screen in a couple of seconds. Remove the flash drive and power down the system.
4. Wait ten seconds and then power up the system and enter Windows, hopefully without any GSOD problems.
5. I highly recommend BIOS 0211 or above with this fix as the vBIOS was certified on BIOS 0211.
6. Although they are rarely mentioned, a big thanks to the beta testers (Chasity, etc) and our engineers/product managers in Taiwan for their dedicated attention on this matter.

If you have any questions or concerns please contact me. If this fix proves successful for you then it would be nice to hear it but more importantly if it did not work then post it here


Source :
G73 GSOD Vbios Update

 

Im sorry i didn't see the other topic Gary Key posted himself .