The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Clock stuck on 500/1000 after running AMD GPU TOOL

    Discussion in 'ASUS Gaming Notebook Forum' started by Masterashs, Oct 28, 2010.

  1. Masterashs

    Masterashs Notebook Guru

    Reputations:
    0
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    15
    In order to try fixing the problems i having on this topic (link) i installed the AMD GPU CLOCK TOOL.

    I tried one configuration just to see how it works (value 500/1000) and it set up my clocks to 500/1000 and voltage to 1.15.

    After testing ive found it set ur clock to a fixed value and this value didnt change when on 2D AND 3D, so i ran the default clocks option and everything was normal again.

    But after some time e realize that my clocks get stuck on 500/1000 0.95v and everytime this happend the only option is to open AMD GPU again and press default clocks again.

    I dont want to need to check my clocks all the time to see if they are stuck, so im asking. Is there any solution for this?

    thx in advice
     
    Masterashs, Oct 28, 2010
    #1