Device manager G73

I've searched this forum, but the results were rather...disappointing
So here's my thing, i got a yellow "!" for the pci simple communications controller. Anyone got 'n idea for that ?

I've tried updating them, no results. Tried removing them and click the "detect recently changed devices", no results eighter.

 

Major lazy copy and paste thing going on today.Here is a post I made earlier. Honest.

PCI Simple Communications Controller

Problem:
The Found New Hardware Wizard cannot find the driver for the PCI Simple Communications Controller. What is the PCI Simple Communications Controller and where is the driver?

Solution:
PCI stands for Peripheal Component Interconnect and is an industry standard bus for attaching peripheal devices to a computer. The PCI Simple Communications Controller is a generic label given by Windows to PCI boards installed in a PC when the drivers for the device are not installed.



You are likely receiving this error because you have not installed the driver for your PCI device. To determine which device you need to install the driver for, you can follow the steps below:

Right-click on the entry in Device Manager and select Properites
In the Details tab, there should be an entry such as PCI\VEN_1093&DEV_70B8&…
This indicates the Vendor and Device ID of your PCI device. In the above example, the VEN would be 1093 and DEV would be 70B8
You can look up your device online on sites such as PCI Vendor and Device Lists. The Above VEN and DEV values give the following result:

 

Imma make it easy on you and tell you to use to driver disc and go to the software folder and install the thing under the "MEI" folder.

If you dont have the disc you can get it from chastity's driver page i believe.

The rest of the info on that folder goes as follows:

H:\Software\MEI\Intel\Intel(R)_Management_Engine_Components\XP32_Vista32_Vista64_Win7_32_Win7_64_6.0.0.1179

 

Thank you both for your replies. +1 rep

Edit: Its my intel HM55 chipset .
Got it fixed

 

I use the Microsoft driver from Windows Update in the Optional Updates section since it seems to have a newer date and you don't have those two Intel Management services automatically running. You can disable those two processes from running however if you want.