Hi All
I just repasted my G73 . Well the temps are 52 idle.
and i run furmark for 20 mins and here are my questions.
Furmark showed a max of 84C in ints graph for 20 mins.
whereas hwinfo32 showed 93.
is this normal?
Also in hwinfo my fan speeds are always 30%. didnt bump up to 100% why ?
when or at what temps do they bump to 100%.
-
-
Hwinfo the % reading is not accurate, but the RPM reading is correct.
-
As long as your RPM reading is at ~4500 in furmark, your fan is working fine, furmark shows you the dispIO temp, HWiNFO shows you all 3 sensors + the diode.
-
Why doesn't hwinfo show the fan rpm in my G53jw? It only shows the percentage. It was always like that. Any idea?
-
hi,
If you want the fans run at 100% during games for example, perhaps you could try this ? => how to get the fans running at full speed....
Cheers,
-
or HWiNFO32 Download
It may not be supported yet.
There is an entire thread on this app here
http://forum.notebookreview.com/win...uestions-reports-suggestions-discussions.html -
thanks a lot guys. My RPM is ~4400 .even in extreme burning mode in furmark.
Then other thing i noticed is after repasting my laptop is even more silent than before. -
The laptop is more silent when gaming after a repaste because it doesn't hit the temps for the fans to kick in at maximum. 4400RPM sounds about right?
Fans dont go to 100% in G73
Discussion in 'ASUS Gaming Notebook Forum' started by sam fisher, Aug 27, 2011.