The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    G73 W/Intell 6250 wimax trying to connect to WAP4410N

    Discussion in 'ASUS Gaming Notebook Forum' started by Hrogi, Oct 18, 2011.

  1. Hrogi

    Hrogi Notebook Consultant

    Reputations:
    46
    Messages:
    224
    Likes Received:
    0
    Trophy Points:
    30
    Hey All,

    I am running into an issues with my G73JH with an Intel 6250 WiMax card.

    It will not keep a singal connected to a Cisco WAP4410N for more than 5 minutes.
    It then resets and reconnects..

    I installed the newest Firmware to the WAP4410N and that helped.
    I also install the newqest drivers for the Intel 6250 card....
    THat did not change anything.

    What could I be missing...

    Security is set to WPA2-personal and AES....

    I am not sure what to do... Cisco is trying to help , but they are also stummped...
     
    Hrogi, Oct 18, 2011
    #1
  2. Chastity

    Chastity Company Representative

    Reputations:
    1,295
    Messages:
    6,545
    Likes Received:
    336
    Trophy Points:
    251
    Check the driver settings that they match router settings
     
    Chastity, Oct 19, 2011
    #2
  3. Hrogi

    Hrogi Notebook Consultant

    Reputations:
    46
    Messages:
    224
    Likes Received:
    0
    Trophy Points:
    30
    Well we have a fix...

    THe Setting Matched. that was part of another issues.
    We had to set the cards to AES to get Max speed.

    I had to Set the Access point to Channel 11, as it was set on 6.
    I found 4 other wireless signals also using channel 6 as well.
    The interferance was the issue....

    I am very happy to have this fixed.. I have a feeling this is the reason for the other 3 Access point failing. thats why I took over fixxing the issue.

    the Outsource IT guys, did not do a sweep of the used channels in the building.
     
    Hrogi, Oct 19, 2011
    #3
  4. Chastity

    Chastity Company Representative

    Reputations:
    1,295
    Messages:
    6,545
    Likes Received:
    336
    Trophy Points:
    251
    inSSIDer ftw!
     
    Chastity, Oct 20, 2011
    #4