The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    G73JH back vent

    Discussion in 'ASUS Gaming Notebook Forum' started by zaczac, Nov 19, 2010.

  1. zaczac

    zaczac Notebook Enthusiast

    Reputations:
    0
    Messages:
    41
    Likes Received:
    3
    Trophy Points:
    16
    I recently dis assembled my G73jh to do a re-paste to drop the temps and noticed a gap in the back vents. If i look directly into the back vents I can see a small gap underneath each heatsink enough to see underneath them (the gap is only visible on the side closest to the battery). Is this normal or did I place them wrong? The temps are good, max temp in furmark is 83 after 30 minutes so I don't think it effects heat... but I still don't like the look. Thanks!
     
    zaczac, Nov 19, 2010
    #1
  2. -keph-

    -keph- Notebook Consultant

    Reputations:
    22
    Messages:
    132
    Likes Received:
    0
    Trophy Points:
    30
    its normal dont worry i got that too from the beginning...congrats with the temps..
     
    -keph-, Nov 19, 2010
    #2
  3. zaczac

    zaczac Notebook Enthusiast

    Reputations:
    0
    Messages:
    41
    Likes Received:
    3
    Trophy Points:
    16
    phew I thought I didn't push the heat sinks back into place or something :p .
    My temps were decent to begin with 95 max temp, used MX-3 only thing I had lying around... Thanks
     
    zaczac, Nov 19, 2010
    #3