I've owned this laptop for six years and hate to get something else. I recently ordered another GTX 460m, as it was crashing often with artifacts. The original GPU was a G73JW and one I ordered was a G53JW. Vendor said they were the same, however, HDMI no longer works. Do I need a different vbios for this card. Vendor blamed the mono. I ordered another mobo, same board. HDMI still doesn't work on the new board.
Next issue... Fresh re-therm IC Diamond.... GPU runs nice and cool... CPU is running hot. Re-therm'd again... Still runs hot... Inside is spotless, both fans working, vents are spotless. CPU has a nice even spread and no run off on thermal paste... Perfect amount. By hot... Starts up at about 80-90 c, then drops down to 60-70 c. Open Firefox and it ramps up to 90-100. Using Argus monitor and fan cranks up to high on the CPU side fan.
Any help is appreciated.
-
according to your second problem of cpu heating .. it might because of your cpu heatsink base which touches with the cpu die needs lapping ...you can do it by yourself with a sandpaper(not too hard) patiently and slowly...maybe it will work -
Thanks for the reply. My original GPU is 1.5gb and the g53jw is as well.
-
-
Flashed vbios and all is well on the GPU end. CPU however, is still running hot, after the lap. Could it just be failing and running hot? The cooler is perfect now, perfect IC diamond job done, fan is new and vents are clean... Still running between 70 and 100 c. 70 c once its literally doing nothing... 90-100 c if anything is opened... Like a browser or an iTunes update.
-
Flashed vbios and all is well on the GPU end. CPU however, is still running hot, after the lap. Could it just be failing and running hot? The cooler is perfect now, perfect IC diamond job done, fan is new and vents are clean... Still running between 70 and 100 c. 70 c once its literally doing nothing... 90-100 c if anything is opened... Like a browser or an iTunes upd
-
Dup
-
Sorry for the duplicate posts. My phone was not showing it posted.
So, the issue with the CPU is the heatsink. Seems these pipes have vented. No fluid left in them. I have ordered another CPU heatsink and will post new temps after another tear -
Spartan@HIDevolution Company Representative
-
G73SW 2 problems
Discussion in 'ASUS Gaming Notebook Forum' started by jones0170, Jun 14, 2016.