[HELP] Installing XP Problem

Hi,
I need some help with my laptop problem. I bought the ASUS M50VN... but... as i dont like windows vista, i decided to change the OS to Windows XP SP3.
As some of you know, this ASUS Laptop doesnt load the Windows XP Bootable CD to format Vista and install the XP because during the CD read we see a
bluescreen error.
Well... i searched in some websites and foruns about this problem and i found some info in Driverlot.com and in the Asus Forum:
http://vip.asus.com/forum/view.aspx?id=20070731141139875&board_id=3&model=G1S&page=1&SLanguage=en-us
http://forums.driverlot.com/viewtopic.php?f=11&t=3 - Comment nr. 6 by DriverMaster.
Well, i chose the Asus Instructions but with a diffrent SATA Driver( http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2101&DwnldID=16013&lang=eng)
because is updated and have Intel 4 Series Chipset Compatibility... and i burned the Windows XP successful... After that, i run the bootable cd and it
worked fine.
The problem was after the Windows XP Intalled, when the Windows XP SO is finishing the install, the System reboots to run by the first time the XP SO...
and when it runs for the first time, the blue screen error appear.
The blue screen appears always when the Screen shows me the XP Symbol... well its before that because i see an only seccound of the XP symbol and after
that second i got the blue screen error and it goes reboot.

What is the solution to this problem? help me fast pls

Sry my bad English... if you do not understand it i will try to explain you it again.

Best Regards,
portela

 

The M50VN is not intended to support XP. If you do get it to work and ever send the machine in for service, Asus will likely wipe the HDD and install Vista again as originally intended. You will be two generations behind with your OS when Windows 7 comes out. Like my ex tell me: quit living in the past!

 

are you sure you seleceted the right sata driver from the list? i dont have an m50, but the n makes me think montevina and so an IHC9-E/M chip. and make sure when you install it, sata mode in bios is enhanced.

 

Ye... i did it well and i chose the IHC9-E/M...
But look... my bios hasnt the option to change AHCI mode... i can only see IDE Configuration Mode... I click it and then i can only see SATA Mode (Compatible/Encahnced)... i dont know why... anyone knows?

 

F8 on startup -> disable automatic restart on system failure.
what does the bsod say?

(and yea, make sure IDE mode is enhanced)

 

The error number:
*** STOP: 0x0000007B (0xBACCF524, 0xC0000034, 0x00000000, 0x00000000)

Do u need the text?

(
i havent ide... look my options:
[[MAIN]]
» SYSTEM TIME
» SYSTEM DATE

[[ADVANCED]]
» IDE CONFIGURATION
~~~ SATA Operation Mode (2 Options: Enhanced and Compatible[X])
>>>>>>>>> Primary IDE Master : HardDisk
------------------- Type (Not Installed/Auto[x]/CD-DVD/ARMD)
>>>>>>>>> Secondary IDE Master : ATAPI CDROM
------------------- Type (Not Installed/Auto[x]/CD-DVD/ARMD)
» START EASY FLASH
» INTERNAL POINTING DEVICE
» PLAY POST SOUND
» SPEAKER VOLME
» INTEL(R) VIRTUALIZATION TECH
» INTEL VT-d
» DTS-BASED THERMAL MANAGEMENT
)