Asus N53SN panel replacement ?

Hi , everyone . I have Asus laptop (n53sn). I want to change the display panel and make my laptop 3d supported. I am searching 3d display. Asus G51J is 3d laptop. And the same size (15.6). This panel to be compatible ??

Link : ASUS G51J replacement Laptop LCD Screen from $117.99 Brand-new screens (never used).

My laptop : n53sn-sz024v 1920x1080 screen gt550m 3d supported graphic card.

(Sory for my bad english)

 

You cannot use a 3D panel in a non-3D laptop because it has no 3D emitter.

Of course you can use it as a normal 2D panel but that may defeat the purpose.

Also there was only a G51J-3DE model that had 3D support, the other versions of the G51J did not.

 

Can i use this 3D emitter and G51J-3DE 3d panel with my laptop ?

 

Hmm... The G51J-3DE screen is 1366x768, and yours is 1920x1080, so you *should* have a dual link LVDS cable that can handle the 3D panel at 120Hz at that lower resolution. The only other consideration would be the type (amount of pins, form factor) of the cable connection, and its position on the LCD itself (the cable may not reach if it is positioned further away on the G51J-3DE screen). If you haven't looked at it physically, you can probably find the specifications PDF for your LCD panel and look at that to see how many pins it uses, the connector type, and the pinout. You may have to fabricate or modify the cable to match the new panel

I've never seen anyone do that with the separate USB emitter on a laptop. I think you would need to position it directly above the top of the screen bezel. Whether it will actually work I have no clue. You are in uncharted territory.

 

Thank you