The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Fan constantly at max rpm/not detected

    Discussion in 'Asus' started by ArakelTheDragon, May 20, 2017.

  1. ArakelTheDragon

    ArakelTheDragon Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Good day! I replied thermal paste (Arctic Silver mx-4, cooler master mastergel maker, a 1w/Mk cheap paste) on my laptop but after that my CPU began to overheat consistently and no matter what I do what paste I use, the fan works at maximum rpm and is not detected by my laptop I believe. When I start speedfan, it doesn't show me the rpm and on startup it gives me "no active display found". I see the temperature of the CPU and GPU and its fine on 40 degrees.

    Laptop: Asus X55VD
    Paste used: Cooler master mastergel maker at 11w/Mk
    Arctic Silver mx-4 at 8.5w/Mk
    Cheap thermal paste Manhattan at 0.95w/Mk

    Recommended for my processor Intel B980 is Arctic Silver mx-2 at 5.6w/Mk

    The fun part is that when I put a better paste the processor overheats more.
    Does anyone have ideas?