Free Asus Parts

Ok so i have boxes and boxes of plastic parts like covers and such. These are all for the following models
z71v
z70va
z63a
w3a
z33a
m5n
m6n
z80k
z96
s96
z62
all types of fans and fan assembly
and some others. Post your request below. These are free by snail mail. Please do not request parts like motherboards, cpu's, hard drives ram. This is for platic parts and internal cables only. Do not PM me. Post below please

 

Eddie:
Do you have the 3x5" HDD grey plastic cover for underneath the Z63? Mine is cracked and I'd love to get an intact one to replace it.

Also, if you have the top outside cover (grey) for the back of the z63's LCD (careless scratches I'd want to get rid of with a replacement) - but I'm not sure how difficult it might be to pull this off. Any thoughts?

How should I get you my mailing address? thx. --troy

 

yes i do indeed email me directly for snail mail or send 10$ for ups ground,,,

 

sorry man the lcd cover is not free I actually go through them and dont have more then a few to spare. the hdd cover is yours though

 

No problem, the HDD cover will do fine. The scratches aren't that big anyway, just annoying in certain light. thx!!

 

I might be interested in some M6N parts. What kind of M6 parts do you have lying around?

 

what parts you looking for?

 

Do you happen to have the silver screen bezel for the 15.1" M6N? I'd like to replace that...

 

sorry auroras none left, never really sold the 15.1" models only 15.4"

 

I have a G1 and have been looking for covers for the Hard Drive, CPU, and the wireless access. Will any that you have fit?

Scott

 

no sorry the g1 is not a barebone, this is for barebones only

 

M6BNe:
- top case
- bottom case
- LCD cover
- LCD bezel
- LCD hinges
- 2nd HDD caddy
- fan / fan assembly
- keyboard

Whichever of these you have, I'll get you rid of them. I can get a mailing address from some friends in the US if you give me one or two days.

I don't really need that stuff, it's really just spare parts for eventual replacement, so if anyone actually requires them they should take precedence.

 

eddie,

what kind of spare parts do you have for Z62?

 

w3a, do you have the palm rest and bottom plastic bazel?

 

EBE
I can spare the fan and any of the fan/heatsink parts. the rest i need. Also the drive bay covers, access covers or dummy filler
the lcd bezel, the lcd cover, the hinges, keyboard and 2nd hdd bay we sell. I cant give those away.

Escape
You name what you need i tell you what i can give

Sti-r
I have the bottom. Has very slight damage around the dc jack hole. Can be easily fixed with some super glue. I cant get rid of the palm rests just yet. In about a year our warranty for all these units expire and i will have more stuff then.

 

i got a boat load of z71v parts. Anyone?

 

Thanks. I hope I'll be able to take the fan and heatsink (need to get the address of those friends). Let me confirm this, for standard shipping there are no shipping costs right?

I would also buy the other stuff but it's a bit difficult arranging with the payment for my friends; I think when I do that, I'll buy an entire load of components stuff including things for my V6.

 

Hmmm, Djembe may be interested, but hes rarely on NBR. And I don't think you want(or can lol) go to NBF

On a side note, I'm looking for a Lid, a Bottom casing and the wrist casing for the Z63a/W3a, but I can wait

 

I could use a Z71V hard drive cover and, if you have them, the PATA to SATA converter chip and the the modular bay hard drive caddy.

 

I'm here occasionally

And Eddie's latest iteration isn't banned on NBF. He just chose not to post there anymore.

 

Hello, Z96J(s) user here, I have a few scratches on my back LCD panel, and palm rests that have been bugging me - if you have any spares of those that'd be great. Nothing is absolutely urgent, but I'd take any spare parts for the Z96J/S96J you have for eventual use. Especially if you had any of the original Z96J protoype lids before they went VBI - but I doubt it, so np . If you have any spare Z96 fans that'd be cool too, I'd like to experiment a bit with improving them if I had a spare.

Thanks,
Cat

 

Hmm... i guess my inside palm rest for my W3V is developing the fading palm prints.. maybe a new plastic part for that will work , if thats out the darker Z63 one will be great too! thanks!!

 

do you know if the bottom assembly will fit in a w3j? from what i have seen on the online pictures they look the same but i am not too sure about the screw locations between both laptops.

 

I have alot of fans and heatsinks also.
bottom for a w3j is slightly different.
Also the palm rests that i do have some are also faded somewhat.
Djembe the cover is yours. I do not have the ide to sata converters any longer or if i do it be pretty ard to find them.
I chose to leave notebookforums after they told me politely to stay in the confines of the asus section. After i left the forum was sold and today they are reduced to one tenth of what they were years ago. I think the new owners of it got shafted pretty bad but its their fault anyways for implementing such an unconventional design.

 

cataphact
i have alot of z96 parts mostly heatsinks fans and such. Covers, drive kits.... Cant spare lid just yet. in about a year when all barebones warranty runs out i will repost another thread like this with an actual list. also have the cover above the keyboard and top and bottom covers. Have to hold on to the lids.

 

Thanks!

no prob.

Actually, the owners are the same. What changed is the management, or who the owners let run the day-to-day operations. That's shifted again, and the guy who was running things isn't on the site any more. I agree about the design, though. NBF has got a plan in place to change the color scheme, but the site coder says it's going to take a while to implement. Anyway..

 

So, could you please confirm whether shipping is free? If so I will PM you with an address where to send the fan and heatsink.

Thanks.

 

Cool np - the lid is minor really - if you have a heatsink/fan - when you say about top and bottom covers does that include the section around the touchpad/palm rests?

Thanks,
Cat

 

Could I get a fan/heatsink assembly for a Z96j? Mine's fine at the moment, but I like to be prepared

Krista

 

ebe
shipping is free on parts that can be snail mailed. on anything that weighs over an ounce or two it has to go ups ground. z70 heatsink and fan are ok for snail mail as they are light and small.

Krista
that iss too heavy to be snail mailed. it has to go ground. ground is 10$ to the states 20$ to canada. If you dont need it now you prolly never will. they dont break and are not known to break

cat
the palmrest (topcover) is one solid piece. to big to go into a padded envelope it has to go ground as well.

If you need it paypal me for ground. Small parts are free by snail mail.

 

Do you have any parts that may help me with this problem

http://forum.notebookreview.com/showthread.php?t=250018

I have an asus w3a (z63a) and the screens light is pretty much dead.

Thanks for any help, i really appreciate it.

 

Miro the last reply in the thread is exactly your answer by e.b.e.
I dont have free inverters. that is a part that can break. check the estore they do have them there. we also offer out of warranty repair. inspection is 40$. If you fix it here inspection is free. Cost to replace inverter is 120$ with shipping and labor. It also can be a dead or dying backlight. cost to replace the lcd is 400$ includes shipping.

 

Eddie,

Do you have these available for Z62?
HINGE COVER Left
HINGE COVER Right
Hinge Cover Center - looks like a bit of right.
Keyboard

 

I'd appreciate anything you have for z96j
my notebook is getting pretty scratched up. I take it everywhere. edges are scuffed, fade on the palm rests etc. If you could spare anything I'd take it. Thanks.

 

Any parts for a W3J? Specifically, the laptop lid release button since mines just snapped. Now its painfully hard to open the lid. That, and the cpu fan on mines sounds like its about to die.

 

Escape.
Yes i believe i do. Imail me your request directly

Wuht
Please be specific. worn parts are not broken and new parts become worn too.

Teri
w3j doesnt have a release button it is a magnetic lid. Someone already grabbed a w3j fan from me on this thread. w3j is not even on the list here. This list includes barebones only. Check the estore.

 

Which parts do you have for the m5n? A keyboard by accident?

04-N8V2KUSA1 Preffered

 

Ah, all right, nevermind then. My sister's ACER fan went bad last Christmas and I replaced the unit for her... wasn't sure how common that is. I have the unit from my original S96J that I sent in that got replaced with the S96Jm anyway, in case of failure.

Thanks.
Krista

 

Do you have lcd cover & top case for z62jm ?

 

dont supose you have a v2je keyboard and lcd cover for my v2je

 

Well, the edges are scratched up and getting rougher each day. The average temperature has gone up over the last 2 months by ~4-5 Degrees Celsius. That's after a good dusting so I am not too sure what the problem is. Possibly the fan is dying. I don't need new parts but like I said I appreachiate anything. If I don't get anything that's cool too. Won't get upset over free stuff.

 

Sorry for offtopic: Maybe the quality of the thermal paste has degraded. If you're out of warranty you can try replacing it (if you change fan and stuff you could also replace it).

 

A subtile kick

 

sorry guys i got too many requests by pm and email. Please contact me directly with questions. admins feel free to close thread. anyone who had parts shipped please give back by helping others here. happy memorial day weekend.