ok i cut out the fake fan grill. and i also replaced the thermal grease with as5 2 days ago. and my temps max out at around 76 playing l4d. and max of 84 after 3dmark06. but my palm rest above the gpu is getting hot. should i worry or am i beign paranoid. and no its not under warranty.
-
Soviet Sunrise Notebook Prophet
The heat is most likely coming from the northbridge. No need to worry.
-
ClearSkies Well no, I'm still here..
Well, you've also managed to rearrange the designed internal airflow patterns with your modifications.
You should expect there to now be new air-heated areas that are different from before, even though you've managed to reduce your component temps.
I agree that these are probably nothing to panic about, but you'll have to get used to them. -
The HDD may also be causing your palm rest to become hot.
-
yeah i forgot about the air flow changes and its not too bad i guess i will get used to it.
-
Soviet Sunrise Notebook Prophet
I think you should mod your hand by drilling holes into it so it absorbs less heat when you put it on the palm rest. I'd call it the Jesus mod.
-
nice one Soviet LMAO
-
-
well at 10 mins on extreme burn it maxes at about 88
-
I ran Furmark just now for about 10mins and I maxed at 88c, but that's with ambient temps of 79f.
Stock clocks, but modded voltage. (check my sig) -
that running the gts flash@ 585 1555 820 @ 1.15v or 1.05 i dont remember
oh and remember this is xtreme burn mode.
on a reg test i hit about 76 -
Soviet Sunrise Notebook Prophet
What? 10char
-
Anyways, I can run my GS at 640/1600/800 at 0.95v.Max temps at those clocks are 95c when stressed with furmark for over 15mins in 77f room temp.
-
im just to lazy to flash back down to stock voltage and see if im stable. lol
i know it would take like 3 mins but again im just to lazy. -
ok i just flashed it to 584 1460 825@ 1v.
w will see what happens
G50vt heat?
Discussion in 'Asus' started by Reaper05, Sep 5, 2009.