The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    HELP Ide-Sata problem F3JA

    Discussion in 'Asus' started by IceJoki, Aug 23, 2007.

  1. IceJoki

    IceJoki Notebook Enthusiast

    Reputations:
    0
    Messages:
    30
    Likes Received:
    0
    Trophy Points:
    15
    Hi All

    I'm a newbie here and came here after surfing the internet for 2 days trying to figure out a small problem which is

    I have a F3JA notebook with a Fujitsu MHV2120BH PL which is a Sata HDD (I've opened the HDD case and checked it) and there is a Intel 82801 GBN/GHN (ICH-7-M Family) Sata Storage Controller installed (Can't find ANY mention of a IDE Controller) but my HDD is configured :
    Standard: ATA/ATAPI-0 - Sata 1
    Supporting UDMA Mode 5 (Ultra ATA/100)
    Active UDMA Mode 5 (Ultra ATA/100) (Info from HD Tune) so my question is " Can I change this to support and activate the Sata standard. I've benchmarked the disk and it should be faster. Please any and all help would be good. You all have a good one.
     
    IceJoki, Aug 23, 2007
    #1