Omega settings on the x600

Hi, just wondering if fellow Omega users on Z70V or W3 computers can post up their overclocking settings. So we can get a feel on the reasonable and max capabilites. Thanks.

 

anyone? anybody?

 

On a side note but related, what is the reference clock for the Mobilty X600? I know ATi didn't release the card with a specific clock, letting the manufacturers take care of it, but they usually give a reference clock or clock ranges that should be guidelines for them.

Do we know the clock for other systems with the Mobility X600? that should provide a reasonable range that should be considered stable (heat issues put aside)

 

I'm using Omega up to 515/285 (I'm pretty sure, I'm not on my Z70V right now) and didn't notice any major difference in heat. I want to say that the default clock is 400/215, but my memory could be failing me. I'll check it tonight and give you the corrected numbers if they're different.

 

Holy crap! That's a big boost in Core speed. I think the default values were 400/250. How come you didnt increase the Memory speed as high as you did with the Core? Have you tried going any higher? and if you did, what was the outcome? Thanks.

 

3dMark03 @ 489/330 = 4011
3dmark03 @ 520/370= 4289
Those are my initial recomendations before omega. Countless hours of testing went into that. Those were posted on our forums a few months back. As far as i know omegas do not allow you to go past those without problems. 489/330 those are pretty safe i would say. Have not teste dit lately on newer releases but pretty sure same theory still applies.