The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    V6J LCD backlight issue - V6V harness too short

    Discussion in 'Asus' started by XR4Ti, Nov 9, 2010.

  1. XR4Ti

    XR4Ti Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    So I've got one of the problems described in the old thread http://forum.notebookreview.com/asu...-backlight-switch-problem-5.html?nojs=1#links

    where the wiring harness for the inverter that runs through the hinge is partly damaged.

    But... I bought the V6V replacement cable set, as suggested, but no way will it fit the V6J. All of the cables in the kit were way too short.

    Just wondering if anyone ran into this problem (cables too short) and would have any advice.
     
    XR4Ti, Nov 9, 2010
    #1