The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    w3v undervolted by default?

    Discussion in 'Asus' started by confinoj, Jul 24, 2005.

  1. confinoj

    confinoj Notebook Enthusiast

    Reputations:
    0
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    15
    I started playing around with undervolting today and noticed something strange. Before changing any settings with either rmclock or chc, my default voltage on battery (6x multiplier,800Mhz) is 0.796v as reported by either program. The default for this chip is supposed to be 0.988v. Just to make sure it wasn't something I did when playing around, I restored from a prior HD image and still same results. My only thoughts are that power4 gear does something (I tried uninstalling, but no change) or the most recent w3v bios changed default values. I don't have any problems, but I thought this was odd. Anybody else notice this?
     
    confinoj, Jul 24, 2005
    #1