TEAC DVD+-RW DVW28SLC on m1530 Dell firmware Needed

hello

my DVD didnot lead out "Finilazing" step

its burning but in this step stopped
how can i fix
XPS M1530

hi

bellow log file from nero

http://www.mediafire.com/?0grm3o0xhmx




Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <TEAC DVD+-RW DVW28SLC> Version: A.06 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TEAC DVD+-RW DVW28SLC>Version: A.06 - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TEAC DVD+-RW DVW28SLC atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD3200BEVT-60ZCT0 iaStor Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TEAC DVD+-RW DVW28SLC H: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 15 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.3.2009
CD-ROM (ISO)
11:34:01 م #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:34:02 م #2 Text 0 File Isodoc.cpp, Line 6789
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:34:02 م #3 Text 0 File Burncd.cpp, Line 3233
TEAC DVD+-RW DVW28SLC
BURN-Proof activated

11:34:02 م #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

11:34:02 م #5 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 0. Length: 1086 -> 1084.

11:34:02 م #6 Text 0 File Burncd.cpp, Line 3563
Turn on Track-At-Once, using CD-R/RW media

11:34:03 م #7 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 1086 -> 1084.

11:34:03 م #8 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

11:34:04 م #9 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 1086 -> 1084.

11:34:04 م #10 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 1085 ( 0:16.35)

11:34:04 م #11 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)

11:34:04 م #12 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: TEAC DVD+-RW DVW28SLC;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

11:34:04 م #13 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:34:04 م #14 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1086 (1086) = #1086/0:14.36
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1084 blocks [H: TEAC DVD+-RW DVW28SLC]
--------------------------------------------------------------

11:34:05 م #15 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [H: TEAC DVD+-RW DVW28SLC] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 2531328, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep_________
_
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1086 | 0 | 0x00
1086 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

11:34:05 م #16 Text 0 File ThreadedTransferInterface.cpp, Line 1029
Removed 2 run-out blocks from end of track 1. Length: 1086 -> 1084.

11:34:05 م #17 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

11:34:05 م #18 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

11:34:05 م #19 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

11:34:05 م #20 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.

11:34:05 م #21 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

11:34:05 م #22 Phase 32 File dlgbrnst.cpp, Line 1767
Simulation started at 10x (1,500 KB/s)

11:34:05 م #23 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:34:06 م #24 Text 0 File MMC.cpp, Line 22511
Set BUFE: BURN-Proof -> ON

11:34:06 م #25 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

11:34:15 م #26 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

11:34:15 م #27 Phase 33 File dlgbrnst.cpp, Line 1767
Simulation completed successfully at 10x (1,500 KB/s)

11:34:15 م #28 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 10x (1,500 KB/s)

11:34:15 م #29 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:34:15 م #30 Text 0 File MMC.cpp, Line 22511
Set BUFE: BURN-Proof -> ON

11:34:15 م #31 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

11:34:27 م #32 Text 0 File MMC.cpp, Line 17309
<TEAC DVD+-RW DVW28SLC> start Close Track #2

11:34:28 م #33 SPTI -1176 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
Sense Area: 0x71 00 05 00 00 00 00 0E 00 00 00 00 72 03

11:34:28 م #34 CDR -1176 File ThreadedTransferInterface.cpp, Line 1175
Session fixation error
H: TEAC DVD+-RW DVW28SLC

11:34:28 م #35 Text 0 File MMC.cpp, Line 17309
<TEAC DVD+-RW DVW28SLC> start Close Track #2

11:34:29 م #36 SPTI -1176 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
Sense Area: 0x71 00 05 00 00 00 00 0E 00 00 00 00 72 03

11:34:29 م #37 CDR -1176 File ThreadedTransferInterface.cpp, Line 1175
Session fixation error
H: TEAC DVD+-RW DVW28SLC

11:34:29 م #38 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0

11:34:29 م #39 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 10x (1,500 KB/s)

11:34:29 م #40 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:34:34 م #41 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed

11:34:34 م #42 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



and print screen of imageburn program



thanks

 

whn i downgraded to A05 its worked !!!
so the driver need to new firmware compatible with the newest Bios firmware
or the new Bios need to fix and update with this model
may become A13
i hope Dell write my name on it because iam who descovered solution and burned more than 50 CDs for test

 

well, you could forward your discovery to dell technical support and mentioned something about how you found out...... and if you're lucky, ask some incentive for your hardwork.

you may get some freebies or something.

 

i noted the company manufactered of DVD with the issue problem
really they good people specially a friend there >> and will tell dell too >> i hope that.
this problem in alot of forums and nobody solved it
dell or DVD manufactued not solved too

i hope take effect as soon as possible
i need to upgrade to latest bios firmware with no 1 bug.

 

I'm actually quite confused about your problem... Are you saying that Imgburn is not finalizing your disc? Or it's not cycling on verify mode after it burns and finalizes the disc?

From what i understand based on the picture you posted was that the only problem it encountered was on the verify mode where it needs to cycle the disc tray to be able to verify or scan the disc if the burned copy has no errors. Surely it won't cycle automatically since most (or maybe all) laptop drives cannot cycle by itself. It is definitely unlike most dektop DVDRW Drives that has the mechanism to load/unload the disc using a physical button. laptop drives with tray can be ejected using soft ejecet, meaning from the OS, or using the physical eject button but that same button can't be used to close the tray. You have to manuall push it. Most slot loading drives like the m1530 can only be ejected using the softtouch control or rightclicking the drive in the OS and eject it.

I have an M1530 and tried to recreate your problem the only one i encountered is the same as in your pics where it needed to verify the burned image. All I did was to manually insert the disc back in and press ok button. I'm sure though that it will finalize before verify. This is not a problem at all. In the future if you don't wan't this "error" to come up just uncheck the verify option before or during the image burning process.

I hope i understood what you meant. correct me if i'm wrong.

Goodluck..

 

Dear escalera

thanks alot for your good words and solutions
i will show you more about this problem step by step
let say that i want to burn data CD
i open Nero and drag and drop files and start burning process
1- lead on: pass
2- the burn running well ass
3- lead out "Finalize" : failes - its stop and giving error

whn i enter the burned CD i found it Blank !!!
what happen is the data alredy written but the cd not finalized so the system canot see it

you can see the data through this way: open Nero Burning ROM - from multi session choose "continuo multi session disk" and then u will find that the CD is still opened and u can continuo adding data>> press ok and u will see the last data alredy written

so the DVD not closing last session till windows can read the CD !!

i hope u got it

Alaa

 

The BIOS has little to no effect on the burning ability of your slot-load drive.

 

so >> u mean the DVD need new firmware from Dell?

 

No, there is no firmware upgrade for this drive.

 

so dell have to solve this issue and make firmware working good with no bugs with A12 Bios !!!

 

I still don't understand what you are talking about.. There are no bugs.

 

ok so your problem lies in Nero and not in imgburn. Have you tried using another brand of the CD or DVD?

If i understand it correctly, the BIOS will not affect the burning quality of the DVDRW. The issues related to drive burning quality and everything else drive related is relies on the firmware of the drive itself. So far i've not seen any firmware updates for TEAC DVDRW DVW28SLC. BTW this is the same drive that my M1530 came with. So far i've had no problem with burning anything yet. Ive used GQ and Verbatim brand both CD and DVD, FYI.

Your problem can be a combination of a couple of things:
1. It can be an issue with Nero itself - try using another software. If Imgburn can finalize your CD or DVD then it maybe an issue with Nero.
2. Make sure you chose to finalize your media when using the multisession. It maybe that since you are in multisession it is not automatically configured to finalize the disk since its main purpose is for you to be able to add more files later on.
3. If its not finalizing at all it can be that the optical lens or laser of the drive is failing. I've had that happened to me on my desktop where my drive has problems burning and finalizing on different brand of discs. It turned out that my optical lens is going bad and when i replaced the drive everything went back to normal.
4. Since i've not read many people complained about your finalizing issue it could be that it can be a Nero issue or the drive is going bad as i mentioned earlier.

My advice would be to play with different settings or use different burning sofware and see if you experience any common problem and then draw your conclusion from there.

Goodluck again.

 

hello
i think NP in Dell laptop Bios
but i think the DVD need to firmware to able to finalize the CDs normally
the burning process working good "any volume of date"
so what u say ?

note: another CDS tested and another Appz tested too

 

I Googled the "session fixation error" in your log that led me to this : http://forum.digital-digest.com/showthread.php?t=64167. Although the original poster's unit is a desktop, the error generated is the same and maybe applicable to your problem. Check out post #8 cause he might've solved the issue about the "session fixation error" which is linked to an ASPI issue that had happened to quite a few people and has been discussed previously on other posts.

You'll notice that they are talking about the "force package solution" that seemed to have solved some guys problem with burning discs. You may want to try their method. I've never had problem burning on my M1530 so i can't tell you whether this is effective or not. You can also try Googling "session fixation error" which will have so many hits related to that particular error.

Also, Check out this site http://radified.com/ASPI/forceaspi.htm which has the "ForceASPI" info on how to do the "force" solution.

 

hello dear escalera
thanks alot for giving me solutions i made your solution
i think this hellp a little
i will give you Results using 3 Brands of CD & 1 Brand DVD
1- Under windows XP
A- Burning image file"Bin or iso" = success
Media used: [imation CD + sony CD +imation DVD]
program used :Nero 9
B- Burn Data CD files through nero: failed on closing session "Lead Out"
Media used : imation CD + sony CD
program used Nero
C- Burn CD using windows Explorer : failed
Media used : imation CD + sony CD
program used : windows Exlorer

Note for Point B & C
put the cd again into DVD
open Nero and choose continuo multi session
will load last session and it will be still open
Nero will Read last files
pressed Burn and the Burning will success !!

note: i used CD pinacle RW and burned a little files using nero and worked ok !!
note 2: i burned 2 DVD with iso image and burned OK "imation DVD"

Vista: i used default explorer burn" the burning go ok >> and after finish its ok >> but after eject the CD and back it again my windows canot see and read it !!!
even i tested this burned CD On XP and the same poblem the system canot see or read it any way !!
need help

 

the problem still exist "in last step [lead out] !!

 

up >> very very important

 

I'm running out of ideas as to what your problem might be. You can try uninstalling your DVDRW drive from the device manager, restart, then let windows detect it and install it back or you can look for driver updates and then try to update the drivers. Also, try to hookup an external DVDRW, if you have or can borrow one, and see if you can recreate the problem. If you recreate the problem then your problem lies within Windows. BTW which windows are you using? Vista or XP? if you are having success burning on the external drive then your problem may be the M1530 internal DVD writer.

It could also be a corruption in the registry of the burning program built into windows. My last resort will be to repair install your windows or a complete reinstall and see if that solves your problem.

First things first though. KEEP A BACKUP of all your important files and a mirror image (ghost image) of your existing OS before performing any Windows repair or complete reinstall.

I'm running out of ideas. I'll post whatever i missed if there are some.

 

dear escalera
o alredy did that
i uninstalled the device from device manager and the windows installed again

also i tried to find update of driver but i canot find any update ?need you help

also i tried to burn on another copy of windows i installed Dell version xp sp3
and also tested on vista sp1 and the same problem
only in the last step happen !!

really i need help

 

Try an external DVD Writer. If the problem is still there then do a complete reinstall of windows. If your problem remains then i'm sorry to tell you, there's nothing more i can think of to solve your problem.

 

i think the problem need to update firmware of the DVD>> so i need the last firmware for that drive

 

what XP service pack version are you running? SP 1, 2, or 3. If you're running A12 BIOS try downgrading to A09. I'm not sure downgrading the BIOS will help but it's worth a try.

 

i did before and the same

see that atricle

http://forums.cnet.com/5208-4_102-0.html?threadID=88585

what u say?

 

new news
there is people face the same problem

i see sth
this problem happen with cd-R
if choosed start multi or no multi+TAO = failed
No multi session+DAO= success !!

 

hello
i made some test

1- Burn DVD-R imation 4.5 GB TAO using Nero 9 : Burned success
2- Burn CD-R Sony 700 MB TAO using Nero 9 : Burned fail at last step "Lead out" :
its image CD

i fixed the No.2 by the following
i put the CD again into my optical DVD
and continuo multi session and Burn : Burn success
and whn i put it into DVD it can see it normally not Blank CD !!!!

 

Thanks Ala'a,

I am having the same problem and I was following you posts from forum to forum. I will try your solutions, so its mostly Sony CD issues with multi sessions. I will stay away from Sony then.

Thank you,

Tarek, UAE

 

thanks dear tarek for reply
finally i found that the base problem insist in type of the cd quality
most "mosear indian corp" is very very bad
and found that the good quality media running good
try use the knowen quality
the solutions i put before just temperary
if you want to burn on bad media put last sesstion open to able to finalize the cd in the second step

thanks
Alaa
Egypt

 

Hi Alaa.....
I seem to have a related problem on my DELL XPS M1530 with TEAC DVD+-RW DVW28SLC
It cannot read certain CDs. It detects them as blank disks and I can see "702 MB free of 702 MB"
It detected the DELL Webcam CD which came with the laptop though - one of the very few CDs it detected.
My BIOS version is A12. I downgraded to A08 and A09 but it did not work.
It says I cannot downgrade to A05 because my hardware will not support it.
Additionally, I would like to add that this problem has probably arrived after I have upgraded my Windows Vista to Windows 7.

Config:
DELL XPS M1530
2.1 GHz T8100, 3GB RAM, Nvidia GeForce 8600GT
Windows 7

Any help would be greatly appreciated.