help me with BSOD in xp m1330 plzz

i just did a fresh xp install in my m1330. i didn't get BSOD cuz the SATA problem. (installed with the enable achi after installation)


after like 5 hours installing xp, finding newer xp driver, i got everything fine, sound, video, bluetooth etc..

when i checked the device manager, there is a yellow mark at a "sm bus controller" after few search ppl said that's because dell chipset missing, so i checked dell.com and there is a "intel chipset driver" which is compatible with xp.

after the installation of the chipset i'm getting BSOD before the welcome screen

either the save mode is getting BSOD...


any idea? can i revert the instalation? please help

thanx

 

Have you tried system restore to before you installed the driver?

Also, you can uninstall the driver if you think that' the problem.

 

i can't even login windows how to restore :S

btw, i got the messenge of the BSOD:

stop: c000021a {Fatal system error} O_O
the windows logon process system process terminated unexpectedly with a status of 0xc0000139 (0x0000000 0x00000000)

the system has been shut down

 

Try changing your Hard drive to ATA from Ahci in Bios and boot. Ahci is bit of a pain to install if you did not install the drivers before xp installed. Below is how I got it working. You can give it a try:

1st) Download the following drivers from the Intel site:
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2101&lang=eng

Nr. 1. “Intel Matrix Storage Manager iata82_cd.exe” (or whatever the latest version)
Nr. 2. “f6flpy32? (zip/rarfile) These one are the drivers you normally need for the “F6 mode” when you install Windows XP.

2nd) Open file NR. 2. and extract the whole folder to wherever you like. Make sure you remember the location.
Copy from this folder file “IaStor.sys” to C:\windows\system32\

3rd) Copy the following registry file to your desktop (copy and paste it into notepad) and save as “ahci.reg” (Only copy-paste what is between ---- )

———————————————-

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\CriticalDeviceDatabase\pci#ven_8086&dev_2922&cc_0106]
"Service"="iaStor"
"ClassGUID"="{4D36E96A-E325-11CE-BFC1-08002BE10318}"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStor]
"Type"=dword:00000001
"Start"=dword:00000000
"Group"="SCSI miniport"
"ErrorControl"=dword:00000001
"ImagePath"="system32\\drivers\\iaStor.sys"
"tag"=dword:00000019
"DisplayName"="Intel AHCI Controller"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStor\Parameters]
"queuePriorityEnable"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStor\Enum]
"0"="PCI\\VEN_8086&DEV_2922&SUBSYS_B0051458&REV_02\\3&13c0b0c5&0&FA"
"Count"=dword:00000001
"NextInstance"=dword:00000001

———————————————-

4th) Go to This Computer-> Properties -> Hardware -> Device manager.
Under IDE ATA/ATAPI-Controllers, right-click the first INTEL(R) Controller, and update the driver.
Manually install the driver!! Make sure in every step you choose yourself what drivers to install!!
Browse to the folder where you extracted file NR. 2.: "f6flpy32?.
Now choose the "iaAHCI.inf" to install.
Intel(R) 82801HEM/HBM SATA AHCI Controller
All the AHCI drivers will be installed now.

5th) Double check you’ve copied the IaStor.sys file as part of step 2. Now do the following:
Run the “ahci.reg " file to add the entries into the registry.
Reboot the computer and enter the BIOS.
Change the setting for the on board Intel controller to AHCI, save and exit BIOS.
Boot into Windows

6th) Windows will startup because of the manually installed drivers in step 4.
Windows will find new hardware and install drivers automatically
(because you changed the original driver manually in step 4, windows wants to restore this driver).
Just ignore this and go to the Nr. 1. file: " Intel Matrix Storage Manager iata82_cd.exe “.
This is a setup file. Run this setup and the “Intel Matrix Storage Manager" will install the complete AHCI-SATA driver.

After installation:
Reboot

 

I think i got the problem.

i searched the error code is during login, and not during loading vista


I just first put in ata mode, then replaced the following files using vista disk's console lol, and reenable achi, and done

asycfilt.dll
atl.dll
comcat.dll
mfc42.dll
msvcp60.dll
msvcrt.dll
oleaut32.dll
olepro32.dll
stdole2.tlb