I've been testing around with the CPU speed on Vista's Power options as well as with RMClock. I noticed there is a Super Low Frequency Mode that was implemented, which allows the processor to run at a lower voltage.
However, the multiplier I see when running Super LFM is at 8x as opposed to the lowest setting which is 6x. This raises the clock speed from lowest 1.2 Ghz to 1.6 Ghz. I notice if I limit the processor speed through Vista's power settings, the lowest setting is considered to be the Super LFM one which runs at 1.6 Ghz. RMClock reports this speed to be at 800 Mhz however, but CPU-Z reports it at 1.6 Ghz![]()
Does anyone have any info on these settings and which one will save the most power?
-
My blind guess is that RMClock reports it per core, whereas CPU-Z per processor.
-
But they both report the same speeds in all other cases with standard 1V Voltage (ie. 1.2 Ghz at 6x, 1.6 Ghz at 8x, 2.0 Ghz at 10x, 2.4 Ghz at 12x). The Super LFM uses something like 0.925V.
-
super LFM = super low frequency mode?
512k pi @ SuperLFM took 29s
512k pi @ 1200mhz took 16s
so we can safely assume that SLFM is .8Ghz and is just reported wrongly by CPU-z
I presume that there are other powersaving 'things' happening as the times are roughly in a 1:1 ratio but the change in core speed isnt.
Super LFM?
Discussion in 'Dell' started by darksiege, Mar 10, 2008.