The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

Problems? See this thread at archive.org.

Will this RAM work in a 6400

Discussion in 'Dell' started by markjobrien, Jun 30, 2007.

markjobrien Notebook Enthusiast

Reputations:

-1

Messages:

15

Likes Received:

0

Trophy Points:

5

Would these spec work on the 6400

200-Pin DDR2 SO-DIMM
Tech Spec
Capacity 1GB
Speed DDR2 667 (PC2 5300 5400)
Cas Latency 4
Voltage 1.8V
ECC No
Registered/Unbuffered Unbuffered
Heat Spreader No

Warranty Lifetime

GENERAL SPECIFICATIONS
200 PIN Memory

667 Mhz

SODIMM (DUAL IN-LINE MEMORY)

Non-ECC

Non-Parity

TECHNICAL SPECIFICATIONS

Brand new.

It is well tested.

1GB

64 X 8 Configuration (Low Density - compatible with all Laptops)

Non ECC

Gold leads

Its a bit different from the crucial memory scanner recomended the

the CL is 4 as opposed to 5

and the memory density is 64X6 as opposed to what the crucial memory scanner recommneds

Will this make a difference

markjobrien, Jun 30, 2007

#1
markjobrien Notebook Enthusiast

Reputations:

-1

Messages:

15

Likes Received:

0

Trophy Points:

5

OK i checked the RAM from crucial. The RAM i posted above is from Ebay from a seller called fastmemoryman who has been recommended on this site before for RAM. The difference is for the 667mhz modules PC5300

The difference between his RAM and the Crucial RAM is as follows:

Cas Latency 4 VS. Cas Latency 5(from Crucial)

Density is different think its
64X8 VS. 128 X 6(from Crucial)

Everthing else is identical, now would these little differences effect compatibilty. Someone out there must know

markjobrien, Jul 1, 2007

#2