The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    processing speeds

    Discussion in 'Dell' started by GaMeRxD, Feb 24, 2008.

  1. GaMeRxD

    GaMeRxD Notebook Evangelist

    Reputations:
    18
    Messages:
    528
    Likes Received:
    0
    Trophy Points:
    30
    is there much of a difference between the 2.2/2.4/2.6ghz processors?
     
  2. Bowlerguy92

    Bowlerguy92 Notebook Deity

    Reputations:
    50
    Messages:
    788
    Likes Received:
    7
    Trophy Points:
    31
    The 2.2 and 2.4, no not really. Between the 2.2 and 2.6 yes there would be a difference, but only really noticeable when doing heavy graphics work or encoding.
     
  3. GaMeRxD

    GaMeRxD Notebook Evangelist

    Reputations:
    18
    Messages:
    528
    Likes Received:
    0
    Trophy Points:
    30
    would the T9300 be any different than the T7700?
    besides the battery life increasing and the heat going down?
     
  4. Bowlerguy92

    Bowlerguy92 Notebook Deity

    Reputations:
    50
    Messages:
    788
    Likes Received:
    7
    Trophy Points:
    31
    No, you would notice absolutely NO difference between the two. And the battery life and heat will be virtually the same.
     
  5. _GMAN_

    _GMAN_ Notebook Consultant

    Reputations:
    141
    Messages:
    137
    Likes Received:
    0
    Trophy Points:
    30
    i was told you see a 30% INCREASE from each jump in the 2.2, 2.4, 2.6
     
  6. Bowlerguy92

    Bowlerguy92 Notebook Deity

    Reputations:
    50
    Messages:
    788
    Likes Received:
    7
    Trophy Points:
    31
    Then you were lied to. 200mhz will NEVER result in almost a 33% increase in performance.
     
  7. Apollo13

    Apollo13 100% 16:10 Screens

    Reputations:
    1,432
    Messages:
    2,578
    Likes Received:
    210
    Trophy Points:
    81
    It will if you're at 600 MHz or less to begin with. Be very careful when saying "never".

    The difference is pretty much linear here. 2.6 GHz will give you about an 18% improvement over 2.2 GHz and a an 8% improvement over 2.4 GHz. 2.4 GHz will give you about a 9% improvement over 2.2 GHz. Will it be noticeable? It depends on what you're doing with the processor.