The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Need help with EGPU setup

    Discussion in 'e-GPU (External Graphics) Discussion' started by Insifada, May 9, 2012.

  1. Insifada

    Insifada Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    5
    Originally Posted by Insifada View Post
    Hey there, so I received all my parts today :
    -PE4H v2.4
    -PM3N
    and a GTX 460

    My computer is a Dell Latitude E5510, win7 32bits, 4G of RAM. ( I tried with 2Gig)

    I plugged everything in ( pm3n was kinda hard to fit into my comp because its usually a half-lenght card that fits in that mpcie port )

    I boot up my comp, power egpu at windows loading and everything loads fine. There is 3 green lights on the PE4H and the gtx fan spins quite fast. There is 2 lights on the pm3n that will light on a yellow/orange and green one.

    One problem, nothing is happening... I tried to use the Verde 293.XX driver with modified nvam.inf file, drivers tell me cant find the card.

    So the card fan just spins but nothing happens, no error no nothing

    What now ? I dont know what to do ?
     
    Insifada, May 9, 2012
    #1
  2. User Retired 2

    User Retired 2 Notebook Nobel Laureate NBR Reviewer

    Reputations:
    4,127
    Messages:
    7,860
    Likes Received:
    10
    Trophy Points:
    0
    User Retired 2, May 11, 2012
    #2
  3. ciccio64

    ciccio64 Notebook Enthusiast

    Reputations:
    39
    Messages:
    43
    Likes Received:
    0
    Trophy Points:
    15
    Hi guys.Helppp!!
    after two successfull implementation on the ferrari one and on a friend computer now i need help..i am trying to implement a egpu on my old laptop a toshiba satellite
    A135-S2286 with a T2060 overclocked to 2.4 with pin mod and an ATI radeon XPRESS 200M.The problem is the egpu is'nt recognized at all.If i stby the system and than resume with egpu connected than i just get the card spinning and a black screen.the same happen if i boot with egpu powered and connected.any advice?The egpu is a geforce gt430.
     
    ciccio64, May 12, 2012
    #3