The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Problem booting Fujitsu T5010

    Discussion in 'Fujitsu' started by javigh, Dec 4, 2012.

  1. javigh

    javigh Newbie

    Reputations:
    0
    Messages:
    6
    Likes Received:
    1
    Trophy Points:
    6
    Hi, all!

    We have a problem with a Fujitsu T5010. The thing is the notebook doesn't boot. When you turn it on, the fan turns on and the optical drive too but that's it. The screen stays black and it doesn't do anything.

    We have tried to change the RAM, the hard drive, remove all the cards (Wifi, etc.) with no luck.

    The tablet have 5 buttons on the screen. If you press one of them, it beeps once, but if you press the right one, it beeps twice. The right one is kind of special because if you press it three times, the notebook keeps beppeing until it is shuted down.

    Does anyone have an idea about what is wrong with it? Does it have a jumper or something I can use to reset the BIOS?

    Thanks a lot!

    PE: I have to say that we have tried to turn it on with the battery only, plugged to power and the battery and then without the battery...
     
    javigh, Dec 4, 2012
    #1
  2. nakednakedguy

    nakednakedguy Notebook Guru

    Reputations:
    8
    Messages:
    60
    Likes Received:
    0
    Trophy Points:
    15
    Try a cmos reset, I dont know if there's a jumper but you can remove the cmos battery and reseat it.

    Disassembly disassembling the t5010
     
    nakednakedguy, Dec 4, 2012
    #2