The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

Problems? See this thread at archive.org.

TL-?? cpu compatability...

Discussion in 'Fujitsu' started by rhino.software, Aug 28, 2007.

rhino.software Notebook Consultant

Reputations:

13

Messages:

144

Likes Received:

0

Trophy Points:

30

just wondering if my XA-1526 would support the newer TL-66 cpu??

it runs without problems on both tl56 and tl60 cpus but wanted to know as for upgradability?

as far as the specs go the heat tolerance is the same as or maybe a degree lower than my 90 dye cpu because of them being a smaller dye ..65mns.

note manual only stated upto tl60 as tl64 and tl66 were not in production when laptop was purchased.

would the bios recognise the cpu as there isnt much info on the last bios update for newer cpu detection but i suppose it should just detect it like the tl60.

any advice cheers.

rhino.software, Aug 28, 2007

#1
powerpack Notebook Prophet

Reputations:

7,101

Messages:

5,757

Likes Received:

0

Trophy Points:

0

1st is your CPU socket 1,CPU-Z should tell you. If so yes other than BIOS you should be good. I think you have a good shot at doing this!

powerpack, Aug 28, 2007

#2
rhino.software Notebook Consultant

Reputations:

13

Messages:

144

Likes Received:

0

Trophy Points:

30

yes its socket 1 as i have upgraded from tl56 to tl60 and fuji isnt making any more bios for the xa1526 so the tech support told me so i hope it does work when i upgrade

rhino.software, Aug 28, 2007

#3