The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    ATi X1600 overclocking...

    Discussion in 'Gaming (Software and Graphics Cards)' started by israel781028, May 20, 2006.

  1. israel781028

    israel781028 Notebook Guru

    Reputations:
    16
    Messages:
    59
    Likes Received:
    0
    Trophy Points:
    15
    Hi guys!
    I going to get a ASUS A6ja. I Just wondering what would be a safe overclock limit and also in the safe range for the X1600 256mb card by using an omega driver?? :confused: There some following specs:

    • Processor: Intel Core Duo Processor T2400, 1.83GHz
    • RAM: 1GB(512*2) DDR2 533
    • Hard Drive: 2.5" 9.5 mm IDE 100GB HDD with Ultra DMA100 supported
    • Graphics: ATI Mobility Radeon X1600 256MB dedicated VRAM, up to 512MB Hypermemory (shared)

    Thanks for helping!
     
  2. mastha212

    mastha212 Notebook Evangelist

    Reputations:
    116
    Messages:
    585
    Likes Received:
    0
    Trophy Points:
    30
    More important is what's your GPU stock core/mem clocks. Ram or CPU has nothing to do when you are oc-ing your graphic.
     
  3. ikovac

    ikovac Cooler and faster... NBR Reviewer

    Reputations:
    872
    Messages:
    1,637
    Likes Received:
    0
    Trophy Points:
    55
    There are some general ideas about overclocking your GPU/MEM. Check my sig.

    Hope it helps,
     
  4. Charles P. Jefferies

    Charles P. Jefferies Lead Moderator Super Moderator

    Reputations:
    22,339
    Messages:
    36,639
    Likes Received:
    5,091
    Trophy Points:
    931
    Ivan has some great links in his signature. You will have to experiment and see how far you can go.

    Don't overclock if you don't have to. Why do you want to overclock in the first place?