Ati Mobile 2600HD Temps Qestion

Hey, Notebookreview's User's

I have been reading and following laptops on this site for the past few week's, and i have a problem on my Fujitsu Lifebook N6470.

I was reading about Overclocking. the ATi mobile 2600hd but i have looked for the past few days and cant find a program which will allowing let me montior temp's. I have oc/ed for the past 3 years on my desktop's computer's. i enjoy it because i get a little extra from my computer's. i am not a noob at o/cing but i know laptop cant handle o/cing as good as desktops can. i have tired the following programs

Hardware montior which did montior my gpu but it was a trail which i did not care for.
Everest
Ati Tool
Rivetuner which did not show me anything which after reading the sticky about how to get it to montior the temp with ati card's

Ati would allow me to o/c and did do my temps but i would rather have a software program to montior idea and load temps

i did update to the ati drivers and CCC to 8.8 with a very helpful program from drivehevan

that went very smooth, i got that to work with no problem's

Here is my spec's of this laptop

Fujitsu lifebook N6470

Intel T8100 2.1/3mb/800 idea core0 37c core1 42c Load %100 with prime 95 core0 65c core1 68c
Intel PM965 Express Chipset
3gb DDR2 667 Dual-Channel found this out from Cpu-Z
2x 160gb 8mb 5400rpm Sata 2
Ati Mobile 2600HD DDR3 256MB PCi-Express 16x Core:500 Memory 600x2=1200

Ati-Tool showed when i tested it was 50c idea and 57c load i will not lie but i belive this is a good temp for a laptop gpu. but this is my first ever laptop. that is up to date and it very nice. yes it may not be the best but it does work for what i need. from gaming to school work

Also i have notice on the buttom of the notebook there is 2 fans 1 for the gpu and 1 for the cpu they have 2 differnt vent's so i belive they are connected but they have there own vents to push the air better.

Also what was the frist time for me was the sticker on the buttom said it was made in Japan. i was that is the first time for me. the laptop is built very well. it stays very cool the keyboard dont get hot. the buttom dont get sup hot. it will get warm but thats it.

Sorry for all the writting but i like to put all my ponit's of view on something. so i can get some answer's. i belive you guys can help me with this matter.

So please Help me guys


Thanks
Gulkor

 

You got the wrong hardware monitor. The correct free one is here:
http://www.cpuid.com/hwmonitor.php

Or you can also try GPU-Z.

 

~50c idle is pretty much what I have too.

But 57c load? What kinda load are we talking about?

 

Thank you Ayle for the currect link.

Lakjin the temps based off that was from ati tool. when i was testing it. and overclock to 600/600 which is what it said. i am looking for the ati tool program to test it so its stable

what is a stable o/c for 2600hd

also i know how to undervolt on that. what i am wondering about the t8100 is why the idea is kinda high temps

 

Your 8100 runs cooler then my 8300 by a few C, I dont think its high temp at all for that.

I dont know whats the stable o/c for it. But I think there is a thread on here that has a whole discussion on it, you would have to look for it tho, I dont have the link on hand.

 

what program would i use to undervolt my t8100? would you know off hand?

 

RMClock.

http://forum.notebookreview.com/showthread.php?t=235824

 

Thank you notyou. i got the program and got it figured out.

Thanks for helping me.

i still was looking for the o/cing of the 2006HD so i am still looking. if someone has a link to where i find this information. Thank you for finding it for me.

 

You could try looking through
http://forum.notebookreview.com/showthread.php?t=285426

I think there was a discussion on overclocking in there, like page 10-20 lol, gl.